805-501A-111 Datasheet, PDF (4/36 Pages) Magnetrol International, Inc. – KOTRON® MODEL 805 SMART RF LEVEL TRANSMITTER

1.0 QuickStart Installation
The QuickStart Installation procedures provide the key
steps for mounting, wiring, and configuring the Kotron
Model 805 Level Transmitter. These procedures are intend-
ed for experienced installers of electronic level measure-
ment instruments. See Complete Installation, Section 2.0,
for detailed installation instructions.
1.1 Getting Started
Before beginning the QuickStart Installation procedures,
have the correct equipment, tools, and information
available.
1.1.1 Equipment and Tools
• 1¹â„8" open-end wrench or adjustable wrench to fit the probe
process connection size and type.
• 1¹â„4" open-end wrench or adjustable wrench to fit adaptor
on transmitter housing.
• Flat-blade screwdriver
• Digital multimeter or digital volt/ammeter
• 24 VDC power supply, 23 mA
1.1.2 Configuration Information
Some key information is needed to configure the Model
805 transmitter. Complete the following operating
parameters table before beginning configuration.
Display
Units
Set
4.0 mA
Set
20.0 mA
Question
What units of measurement will be
used? (inches or centimeters)
What is the 0% reference point for the
4.0 mA value?
What is the 100% reference point for
the 20.0 mA value?
Answer
_____________
_____________
_____________
1
50-660 Kotron Model 805 Smart RF Level Transmitter