1-87456-1 Datasheet, PDF (92/98 Pages) Tyco Electronics – Mod IV Receptacle Assemblies, Single-Row, Outrigger Design .100 x .100 [2.54 x 2.54] Centerline, End To End Stackable

5
AMPMODU Interconnection System
Application Tooling for Wire Crimp Contacts (Continued)
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-to-
board connectors. Refer to
page 88 to determine the
applicable connectors.
Crimp Force Monitor (CFM)
Your quality program calls
for more than a good
crimping system. It
demands proof - the proof
you get with the SLE Crimp
Force Monitor. It has high-
resolution piezo-quartz
sensor technology for a
more precise identification
of typical crimping faults.
The monitor features Zone &
Peak Force Analysis,
128x128 Dot Matrix, Force
Trigger and Encoder
Proximity Trigger, and
Absolute Force
Measurement for real-time
monitoring of every crimp.
The CFM can be used with
bench or fully-automatic
machines. Special
applicators are not required.
Sure, you can sample and
test crimp height with a
micrometer. In fact, that’s
how you standardize your
process. But for ongoing
quality control, testing every
crimp, SLE is the choice. It’s
known worldwide, and
meets our standards for a
high performance
terminating system. That’s
how you can be sure.
High quality crimping - with
verification - means higher
production and productivity.
AMPOMATOR System III Leadmaker
Commercial PRO-CRIMPER III Premium CERTI-CRIMP Straight
Hand Tool
Action Hand Tool (SAHT)
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shouldered-
style die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and to
help minimize contact rota-
tion and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
Tyco Electronics hand
tools are ideal for small
production and prototype
applications. They feature
ratchet control to help elimi-
nate partial crimps, straight-
line die closure, terminal
The AMPOMATOR
System III is an automatic
machine for the production
of terminated wire leads.
The machine combines
state of the art technology
to process single and
double wire application
utilizing the wire processing
industry’s best and most
friendly subsystems and
accessories available to
meet the latest market
requirements for wire lead
production.
The new machine
incorporates a servo-driven,
software-controlled
AMP-O-LECTRIC ST III
terminator and the next
generation System III
Applicator.
See catalog 1654956-5 for
more information.
locator and support, and
insulation crimp adjustment.
Tyco Electronics hand tools
also can be adapted for
use with pneumatic tooling
assemblies, providing air
operated crimping
capabilities.
For further details on
Tyco Electronics straight
action hand tools, request
Tyco Electronics Catalog
65780. For more details on
Tyco Electronics pneumatic
tooling assemblies, call
the Tyco Electronics
Technical Support Center,
1-800-522-6752.
272
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208