1-87456-1 Datasheet, PDF (73/98 Pages) Tyco Electronics – Mod IV Receptacle Assemblies, Single-Row, Outrigger Design .100 x .100 [2.54 x 2.54] Centerline, End To End Stackable

AMPMODU Interconnection System
Interchangeable Contacts, Wire Crimp (Snap-In)
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
Short Point Receptacles
.068
[1.73]
.460
[11.68]
.060
[1.52]
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
C
C
.012
[0.30]
Gap
Extraction/Lance Reset
Tool No. 843477-1
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling—
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-1472, 108-1472-1
Application Specification
114-25038
Section C - C
5
Wire Size
Range
AWG
[mm²]
Ins.
Dia.
Range
32-28
0.03-0.08
.025-.060
0.64-1.52
26-22
0.13-0.3
.025-.060
0.64-1.52
24-20
0.2-0.5
.025-.060
0.64-1.52
Finish
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Contact Part No.
(Standard Pressure)
Strip Form Loose Piece
1-104481-1
1-104481-0
5-104481-2
1-104480-3
1-104480-2
1-104480-7
1-104479-0
104479-9
104479-8
1-104481-3
1-104481-2
5-104481-6
1-104480-6
1-104480-5
1-104480-4
1-104479-3
1-104479-2
1-104479-1
Heavy Duty Miniature
Applicator for
AMP-O-LECTRIC
Machine*
567296-2
Applicator for
AMP-O-MATIC
Stripper/Crimper
Machine
466980-1
567297-2
466981-1
567298-2
466982-1
Hand
Tool
Nos.
91518-1
91518-1
91551-1
*For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Note: All part numbers are RoHS compliant.
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
253
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208