1-87456-1 Datasheet, PDF (89/98 Pages) Tyco Electronics – Mod IV Receptacle Assemblies, Single-Row, Outrigger Design .100 x .100 [2.54 x 2.54] Centerline, End To End Stackable

AMPMODU Interconnection System
Mini-Tandem Spring Contacts
Receptacle Contacts
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating C — Duplex plated .000050
[0.00127] over matte tin in contact area,
over .000030 [0.00076] nickel on entire
contact
Plating D — .000100 [0.00254] min.
matte tin over .000030 [0.00076] nickel on
entire contact
.060
[1.52]
.085
[2.15]
Min.
Contact
Area with
Gold Inlay
.060
[1.52]
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
Low Pressure Contacts
Wire Size Range
AWG
mm²
Ins. Dia.
Range
26-22
0.14-0.32
0.36-0.54
[0.64-1.37]
Finish
Plating A
Plating B
Contact Part No.
Strip Form Loose Piece
5531216-3 5531216-4
5531216-1 5531216-2
Miniature
Applicator for
Applicator for AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
466819-2
466943-1
Standard Pressure Contacts
Wire Size Range
AWG
mm²
Ins. Dia.
Range
32-28
0.03-0.08
.025-.054
[0.64-1.37]
26-22
0.14-0.32
.036-.054
[0.91-1.37]
Finish
Plating B
Plating C
Plating D
Plating B
Plating C
Plating D
Contact Part No.
Strip Form Loose Piece
530901-2
5530901-6
5530901-4
5530553-4
5530553-6
5530553-2
530901-3
5530901-7
5530901-5
—
—
—
Miniature
Applicator for
Applicator for AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
466723-1
466952-1
466819-2
466943-1
5
High Pressure Contacts
Wire Size Range
AWG
mm²
32-28 0.03-0.08
26-22 0.14-0.32
Ins. Dia.
Range
.025-.054
[0.64-1.37]
.036-.054
[0.91-1.37]
Finish
Plating B
Plating B
Contact Part No.
Strip Form Loose Piece
Miniature
Applicator for
Applicator for AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
5531225-6
—
466723-1
466952-1
5531224-6
—
466819-2
466943-1
*For use with AMP-O-LECTRIC Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-522-6752)
for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as
other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268.
They cannot be used in AMPMODU Mod IV Housings.
2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above.
3. Application tooling is described on pages 270 & 275.
Note: All part numbers are RoHS compliant.
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
269
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208