1-87456-1 Datasheet, PDF (75/98 Pages) Tyco Electronics – Mod IV Receptacle Assemblies, Single-Row, Outrigger Design .100 x .100 [2.54 x 2.54] Centerline, End To End Stackable

AMPMODU Interconnection System
MT and Shielded MT Interconnection System
Product Facts
■ Full line of mass
termination tooling offers
lowest installed cost for
most production needs
■ Dual cantilever beams with
anti-overstress features
provide redundant contact
of mating post and limit
beam deflection, preventing
permanent deformation
■ Redundant insulation
displacement slots provide
for maximum reliability
■ Integral wire strain relief
on contact can prevent wire
motion from being
transmitted to wire
termination areas
■ Built-in contact post stop
can protect terminated wire
from being disturbed by
over-insertion of mating
post, prevents wire from
entering contact area and
positively limits mating
connector depth
■ Insulation displacement
contacts and crimp,
snap-in contacts are
interchangeable
■ Complete serviceability
with replacement contacts
■ Cover styles include
low profile (polarized,
non-polarized, latching and
ejection) and standard
profile (hermaphroditic
and ejection)
■ Connector housings may
be stacked end-to-end
within one pair of covers.
All varieties of covers in
this catalog are suitable for
multiple housing stacking
applications similar to the
example illustrated in the
photograph to the right
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
R
File No. E28476
■ Certified by Canadian
Standards
Association,
R
File No. LR 7189
Typical Application of End-to-End Stacking
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
5-102398-8 D-R Assembly
102537-8 Ejection Cover
102536-8 Back Cover
102185-2 Latch
Wire-to-Board
5-102398-8 D-R Assembly
102540-8 Polarizing Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102541-8 Non-Polarizing Cover
102536-8 Back Cover
5102154-4 Header
5-102398-8 D-R Assembly
102681-5 Latching Cover
102536-8 Back Cover
5-103168-8 Hdr
5-103166-8 Header
5-103166-8 Header
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
The AMPMODU MT and
Shielded MT Interconnection
System offers labor and
cost savings through mass
termination technology,
while maintaining the time-
proven reliability of the
AMPMODU product family.
The MT system is comprised
of preloaded, double-row
receptacle assemblies with
snap-on covers and a variety
of shielding hardware and
accessories. The system is
supported by a full line of
mass termination tooling to
meet virtually most produc-
tion needs.
The insulation displacement
contact, the heart of the MT
system, features a mating
interface that is the same as
the conventional AMPMODU
crimp, snap-in contact, fea-
turing dual cantilever beams,
built-in overstress protection
and a completely enclosed
“box” design.
To reduce EMI/ESD (electro-
magnetic interference/
electrostatic discharge) at
the input-output interface,
add-on metal shields can be
used to convert standard
MT connectors to shielded
MT connectors.
Performance
Characteristics
Contact Current Rating —
3 amperes for single contact in free air.
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Operating Temperature —
-65°C to +105°C
Termination Resistance —
12 milliohms max.
Max. Mating Force —
High pressure - 26 oz. [7.23 N]
Standard pressure - 9 oz. [2.50 N]
Min. Unmating Force —
High pressure — 5 oz. [1.39 N]
Standard pressure — 1.5 oz. [0.417 N]
Contact Retention in Housing —
5 lb. [22.24 N] per contact min.
5
Note: All part numbers are RoHS compliant.
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
255
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a