1-380999-0 Datasheet, PDF (64/98 Pages) Tyco Electronics – 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board)

Soft Shell
Pin and Socket Connectors
AMP
PC Board Vertical
Socket Headers
.250 [6.35] Centerline spacing
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
2, 3, 4 and 5
Circuit, In-Line
Polarizing
feature
Material
Housing — Nylon
Flammability Rating — UL94V-0
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 189-190
Recommended PC Board Hole
Layout— page 199
Technical Documents— pages 189
and 205-206
Mating Connectors
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Universal MATE-N-LOK
Plug Housings — page 175
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.550
[13.97]
.300
[7.62]
Number of
Circuits
A
Dim.
Socket
Finish
Socket Header Part Numbers
Standard
Tail²
Standard Tail
Polarized²
Long Tail³
Mates with Plug
Housing Part Number
(Using Pin Contacts)
Universal
Universal
MATE-N-LOK II MATE-N-LOK
2
.550
13.97
Pre-tin
Duplex¹
350824-1
350824-4
643412-1
643412-3
350831-1
—
770017-1 350777-1
3
.800
20.32
Pre-tin
Duplex¹
350825-1
350825-4
643414-1
643414-3
350832-1
350832-4
770018-1 350766-1
4
1.050
26.67
Pre-tin
Duplex¹
350826-1
350826-4
643416-1
—
350833-1
350833-4
770019-1 350779-1
5
1.300
33.02
Pre-tin
Duplex¹
640901-1
640901-3
—
—
—
770016-1 350809-1
—
1_{Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050}
[.00127] min. nickel underplate on entire contact.
2_{Use Standard Tail for .062 [1.57] thick PC Board.}
3_{Use Long Tail for .125 [3.18] thick PC Board.}
6, 9, 12 and 15
Circuit, Matrix
Polarizing
feature
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.550
[13.97]
.800
[20.32]
Number of
Circuits
A
Dim.
Socket
Finish
Socket Header Part Numbers
Standard
Tail²
Standard Tail
Polarized²
Long Tail³
Mates with Plug
Housing Part Number
(Using Pin Contacts)
Universal
Universal
MATE-N-LOK II MATE-N-LOK
6
.550
13.97
Pre-tin
Duplex¹
350827-1
350827-4
643424-1
643424-3
350834-1
350834-4
770020-1 350715-1
9
.800
20.32
Pre-tin
Duplex¹
350828-1
350828-4
643426-1
643426-3
350835-1
350835-4
770021-1 350720-1
12
1.050
26.67
Pre-tin
Duplex¹
350829-1
350829-4
643428-1
—
350836-1
350836-4
770022-1 350735-1
15
1.300
33.02
Pre-tin
Duplex¹
350830-1
350830-4
643430-1
—
350837-1
350837-4
770023-1 350736-1
1_{Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050}
[.00127] min. nickel underplate on entire contact.
2_{Use Standard Tail for .062 [1.57] thick PC Board.}
3_{Use Long Tail for .125 [3.18] thick PC Board.}
198
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Note: All part numbers are RoHS Compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208