|
1-380999-0 Datasheet, PDF (25/98 Pages) Tyco Electronics – 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) | |||
|
◁ |
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Housings
Panel Mount, Positive Lock
Material
Housing âNylon, natural color
Flammability Rating âUL94V-2
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Performance Characteristicsâ
pages 151-152
Contactsâpages 155-156
Commoning Tabsâpage 155
Keying Plugâpage 156
Technical Documentsâpages 151
and 205-206
Mating Socket Headersâpage 162
Mating IDCâpage 163
3 and 4 Circuit, In-Line
E
.200
[5.08]
F
Pin Housing (Cap)
6, 9, 12 and 15 Circuit,
Matrix
.240
[6.09]
.850
[21.59]
F
.930
[23.62]
.930
[23.62]
.850
[21.59]
.310
[7.87]
G
Socket Housing (Plug)
.850
[21.59]
.650
[16.51]
G
Recommended Panel
Cutout for Panel Mount
Socket Housing
View is from socket housing entry
side
Mounting Information
1. Recommended panel thicknessâ
.025-.065 [.635-1.65].
2. Both locking legs are to be
squeezed together and the hous-
ing is to be inserted âstraight-inâ,
as opposed to a rocking manner.
3. The panel should be punched so
that the housing enters the panel
in the same direction as the
punch.
4. The panel must not have any
material (paint, porcelain, etc.)
applied in the mounting hole area
that would decrease the retention
of the housing in the panel.
5. If the two items above are not
complied with, the âAâ dimension
should be reduced .020 [5.08] for
proper retention.
.202
[5.130]
Pin Housing (Cap)
Socket Housing (Plug)
Number of Dimensions
Part Numbers
Circuits E
F
G Pin Housing (Cap) Socket Housing (Plug)
3
.325 .810 .630
8.26 20.57 16.00
1-480305-02
4
.330 1.010 .825 1-480426-02,4
8.38 25.65 20.96 3-480426-01,2,4
6
â
.665 .555
16.89 14.10
1-480276-03
9
â
.905 .795
22.99 20.19
1-480277-03
12
â
1.145 1.045
29.08 26.54
1-480278-03
15
â
1.382 1.280
35.10 32.51
1-480324-03
1-480304-0
1-480425-04
3-480425-01,4
1-480273-0
1-480274-0
1-480275-0
1-480323-0
1Housing material has 125°C temperature rating
2Detent lock
3Positive lock
4Used by disk drive industry
Note: All part numbers are RoHS Compliant.
3 and 4 Circuit, In-Line
.215
[5.46]
.275
[6.98]
C
A
B
.015
[.381]
R
Max.
D
All Corners
6, 9, 12 and 15 Circuit,
Matrix
.660
[16.76]
C
.219
[5.56]
.218
[5.54]
A
B
D
.015
[.381]
R
Max.
All Corners
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Number
Circuits
Dimensions
A
B
3
.890 .645â.635
22.61 16.38â16.13
4
1.100 .845â.835
27.94 21.46â21.21
6
.840 .575â.570
21.34 14.61â14.48
9
1.075 .815â.810
27.31 20.70â20.57
12
1.320 1.055â1.050
33.53 26.80â26.67
15
1.550 1.290â1.285
39.37 32.77â32.64
Note: Dimensions âCâ and âDâ are to
be equal.
159
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
|
▷ |