1-380999-0 Datasheet, PDF (55/98 Pages) Tyco Electronics – 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board)

Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors
Product Facts
I High reliability
I For use where repair or re-
placement would be difficult
I Pins and sockets can be
intermixed in the same
housing
I Available in 2 through
15 circuit sizes for free-
hanging or panel mount
wire-to-wire connection
I Mate with standard
Universal MATE-N-LOK
Housings and PC Board
Headers
I Uses standard Universal
MATE-N-LOK panel cutouts
and strain reliefs
I Polarized housings available
in UL94V-0 flammability
rated material
I Enclosed contacts for shock
protection
I F-Crimp terminals accept
30-10 AWG [.05 -5.0 mm²]
wire sizes
I Contacts available in strip
and loose form
I Lanceless contacts for
tangle-free handling
I Insulation capability to
.200 [5.08] diameter
I Connector design provides
for complete contact
insertion
I Three-point stabilization pre-
cisely controls contact align-
ment, minimizing stubbing
I Tin or duplex gold plated
contacts
I Contacts are on .250 [6.35]
centerline spacing
I Not for interrupting current
I Recognized under the
Component
Program of ^R
Underwriters Laboratories
Inc., File No. E28476
I Certified by Canadian
Standards Association, ^R
File No. LR 7189
I Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
Performance Characteristics
The Universal MATE-N-LOK II
Connector performance characteristics
found on pages 189-190 are based on
free-hanging and panel mount connec-
tors, loaded with contacts crimped on
stranded wire.
Dielectric Withstanding Voltage—
5.0 KV AC or DC between adjacent
circuits initially
Insulation Resistance—
1000 megohms minimum between
adjacent circuits
Voltage Rating—600 V AC or DC
Connector Mating—
Split Pin — 1.5 lb. max. per circuit
Connector Unmating—
Split Pin — .5 lb. min. per circuit
Contact Insertion Force—3.0 lb.
max. per contact unassembled
Contact Retention—35 lb. min. per
contact
Durability—50 cycles, mating and
unmating
Technical Documents
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Application Specification
114-1043 Universal MATE-N-LOK II
Connectors
Instruction Sheet
408-3200 Housing, Contacts and
Accessories
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
189
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208