6437288-5 Datasheet, PDF (6/41 Pages) Tyco Electronics – SUPER SEAL CONNECTOR

Product Specification
108-78140
No.
7.5
ITEM
Voltage Drop
MEASUREMENT METHOD
PERFORMANCE
As shown in Fig.1 while feeding open voltage of 20±5mV and short Initial:
5mΩ or less
circuit current of 10±0.5mA to the mated conector, measurement is After Durability Test: 10mΩ or less
taken at the point 75mm apart from the crimped barrel when
temperature of the mated contact has saturated and then voltage
drop by the wire is subtracted.(Resistance of wire is per Table
1.)
Fig.1
measurement
A
75
Rev. A8
Table 1
Wire size
Resistance
(mΩ/75mm)
0.5
2.45
0.85
1.56
1.25
1.07
6 of 41