6437288-5 Datasheet, PDF (11/41 Pages) Tyco Electronics – SUPER SEAL CONNECTOR

Product Specification
108-78140
No.
7.16
7.17
ITEM
Temperature
MEASUREMENT METHOD
PERFORMANCE
“Temperature Rise Test” of item No.8.16 is made and temperature of Temperature rise: 60℃ or less.
Rise Magnitude connector surface near the mated interface of the contact, is
measured when the temperature has saturated.
Intermittent Power of 12V or less open voltage and 1A or less short circuit Intermittent discontinuity shall not last for 10
Discontinuity current is applied to the mated connector with the contacts in all μsec or more.
positions connected in series and then intermittent discontinuity
is monitored with an intermittent discontinuity detector.(Fig.5)
Fig. 5
Connector
Intermittent
Discontinuity
Checker
Rev. A8
11 of 41