409-2426 Datasheet, PDF (6/17 Pages) Tyco Electronics – Pneumatic Tools

Pneumatic Tools 68068 and 68068-1
409-2426
ÒÒÒÒ_{Air Pressure}
ÒÛÛÒÛÛÒÛÛÒÛÛ_{Air Exhaust}
Detail A
Physical and Functional Description
Control Button
Air Hose
Terminal or
Splice
Jaws Open
ÒÒÒÒÒÒÒÒÒÒÒÒÒÒÒÛÛÛÛÛÒÒÒÒÒÛÛÛÛÛ
Cam in Neutral Position
Return Side
Piston
Detail B
Jaws in Crimp
Position (Closed)
ÛÛÛÛÛÛÛÛÛÛÛÛÒÒÒÒÒÒÒÒÒÒÒÒÒÒÒ
Cam Advanced
Power Side
Figure 4
3. INSTALLING AND REMOVING JAW ASSEMBLY
3.1. Installing Jaw Assembly
1. DISCONNECT the tool from the air supply.
DANGER
To prevent personal injury, ALWAYS DISCONNECT the tool from the air supply when installing the jaw assembly.
2. Refer to Figure 5, and select the applicable jaw assembly for the terminal or splice and wire size
being crimped. For detailed information about the jaw assembly, refer to the instruction sheet listed.
NOTE
i
The jaw assembly is coated with a preservative to prevent rust and corrosion. Wipe the preservative from the jaws,
particularly from the crimping area.
6 of 17
Tyco Electronics Corporation
Rev A