409-2426 Datasheet, PDF (3/17 Pages) Tyco Electronics – Pneumatic Tools

Pneumatic Tools 68068 and 68068-1
Top Handle
Position
Tool 68068
Tool 68068-1
409-2426
Jaw Assembly
(Not Included)
Side Handle
Position
Jaw Assembly
(Not Included)
Figure 1
1. INTRODUCTION
Pneumatic Tools 68068 and 68068–1 (shown in Figure 1) are light weight portable hand tools that accept an
interchangeable jaw assembly. The jaw assembly provides the tool with a versatility for crimping a wide variety
of types and sizes of terminals or splices. Tool 68068 has a top handle position, and Tool 68068–1 has a side
handle position.
When reading this manual, pay particular attention to DANGER, CAUTION, NOTE statements.
DANGER
Denotes an imminent hazard which may result in moderate or severe injury.
CAUTION
Denotes a condition which may result in product or equipment damage.
!
NOTE
Highlights special or important information.
i
Reasons for reissue of this customer manual are provided in Section 9, REVISION SUMMARY.
NOTE
i
All numerical values in this instruction sheet are in metric units [with U.S. customary units in brackets]. Dimensions are
in millimeters [and inches]. Figures are not drawn to scale.
1.1. Specifications
Specifications for the pneumatic tools are given in Figure 2.
Specifications
Air Pressure Range . . . . . . 552-689 kPa [80-100 psi]
Air Displacement . . . . . . . . 40 cu in. (Approx)
Weight . . . . . . . . . . . . . . . 5 K [11 lb] (Approx) (Including Jaw Assembly)
Figure 2 (Cont’d)
Rev A
Tyco Electronics Corporation
3 of 17