3-66104-0 Datasheet, PDF (6/9 Pages) Tyco Electronics – Signal Contacts

AMP Precision Pin and Socket Contacts
Type II, Screw Machined,
Crimp
Signal Contacts (Continued)
Material
Contact Body—Brass
Retention Spring—Stainless steel
Finish
Contact Body—.000030 [0.00076]
gold over .000050 [0.00127]
nickel. Gold thickness controlled
Pin
.107
[2.72]
Max. Dia.
on socket O.D.
Retention Spring—Stainless steel
Related Product Data
Application Tooling—Pages 75-78
Spring
1.087^±.010
[27.61^±0.25]
.472^±.005
[11.99^±0.13]
Spring
Pin
.062^±.001
[1.57^±0.03]
Dia.
Pin Body
.795^±.010
[20.19^±0.25]
Socket
Socket Body
Socket
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Wire Size
Range
AWG mm²
Ins.
Dia.
Range¹
28-24 0.08-0.20
24-20 0.2-0.6
18 0.9-0.9
(Two) (Two)
18-16 0.8-1.4
.035-.055
0.89-1.40
.048-.065
1.22-1.65
.095-.110
2.41-2.79
.040-.062
1.02-1.57
.055-.088
1.40-2.16
No. Ins.
Support
.080-.105
2.03-2.67
No Ins.
Support
14
2
No Ins.
Support
Tape Mounted
Contact No.²
Pin
Socket
Loose Piece
Contact No.
Pin
Socket
Contact
Color
Code
Tooling Part No.**
Tape Mounted
Loose Piece
Dies for
Die Set for
AMP-TAPETRONIC 626 Pneumatic
Machine 69875
Tool System
Hand
Tool
201611-4
—
201611-1⁴ 201613-1⁵ Red/Red
—
—
201334-1⁴ 201332-1⁵ Red/Red
90249-2
90230-1⁷
91538-1*
or 601967-1*
—
—
202410-1⁴ 202411-1⁵ Green
—
601967-1*
201578-4
—
201578-1⁴
201330-6 201328-9 201330-1⁴
201580-1⁵ Yellow/Red
201328-1⁵ Yellow/Red
90249-2
90230-1⁷
91538-1*
or 58541-1*
or 601967-1*
—
—
202725-1⁴ 202726-1⁴
Blue
—
—
202507-1⁴ 202508-1⁵
—
200336-6 200333-8 200336-1⁴ 200333-1⁴ Blue/Blue
—
—
,6^204219-15,6
—
3_212618-23
—
212618-1^3,6,†
—
Blue/Blue
Violet/Blue
201570-2 201568-3 201570-1⁴ 201568-1⁵ Violet/Blue
—
—
90250-1
—
90250-1
—
90231-2⁷
—
90231-2⁷
—
90231-2⁷
—
91539-1*
or 601967-1*
90136-1*
or 601967-1*
91539-1*
58541-1*
or 601967-1*
91539-1-
58541-1*
or 601967-1*
1_{Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].}
2_{For AMP-TAPETRONIC Machine No. 69875, order contacts by Tape Mounted Contact No., plus packaging code “IM REEL” (5000 parts per reel).}
3_{Grounding pin is used to provide a make-first/break-last condition when mating and unmating connector halves.}
4_{Use turret TH502 (1-601967-6) with hand tool 601967-1.}
5_{Use turret TH501 (1-601967-5) with hand tool 601967-1.}
6_{Pin length is .630}±.005 _[16.002±.127_{] on these two pins.}
7_{Die Set requires “C” Head Adapter Part No. 318161-1; Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without); and Power Unit}
Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated).
*Commercial PRO-CRIMPER II Hand Tool for field repair use only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.
**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.
†Does not use Hand Tool 91539-1 or 601967-1.
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability informa-
tion on page 8.
Insertion Tool Part No. 200893-2 (for insulation diameters .070 [1.78] or less).
Extraction Tool Part No. 305183.
Note: All part numbers are RoHS compliant.
14
Catalog 65910
Revised 7-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject to change.
Technical Support
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 01-800-733-8926
Central America: 52-55-5-729-0425
South America: 55-11-3611-1514
www.tycoelectronics.com