3-66104-0 Datasheet, PDF (2/9 Pages) Tyco Electronics – Signal Contacts

AMP Precision Pin and Socket Contacts
Type III+, Crimp, Snap-In
Contact Size—16
Pin Diameter—.062 [1.57]
Signal Contacts (Continued)
Grounding Pin
(make first - break last)
Material and Finish
Contact Body—Copper alloy, plated
tin or gold
Spring—Stainless steel
Related Product Data
Application Tooling—Pages 29, 30
Technical Documents—Page 4
Wire Size Range
[mm²] AWG
0.12-0.2 26-24
0.2-0.6 24-20
0.8-1.4 18-16
Ins.
Dia.
Range¹
.035-.055
0.89-1.4
.045-.070
1.14-1.78
.078-.098
1.98-2.49
Contact
Finish
Tin
Sel. Gold/Nickel²
Tin
Sel. Gold/Nickel²
Tin
Sel. Gold/Nickel²
Grounding Pin Part No.
Strip Form
Loose Piece
164159-3
164159-4
164162-1
164162-2
164160-3
164160-4
164161-3
164163-1
164163-2
164164-1
164161-4
164164-2
Strip Form
Applicator
Part No.
—
466323-^□***
or
466907-2***
466741-□***
or
680114-3***
Loose Piece
Hand Tool**
Part No.
91515-1³ or
58495-1*
91515-1³ or
91505-1³ or
58495-1*
91523-1³ or
91505-1³ or
58495-1*
1_{Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].}
2_{Gold flash over .000030 [0.00076] min. nickel on entire contact, with .000030 [0.00076] gold in contact area.}
3_{To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. (Call}
Technical Support at 800-522-6752), Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuat-
ed) or 189722-1 (foot actuated).
*Commercial PRO-CRIMPER II hand tool for field repair only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.
**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.
***Call Technical Support at 1-800-522-6752 for Automatic Machine Applicator Part Numbers.
Extraction Tool Part No. 725840-1
Note: All part numbers are RoHS compliant.
Type III+, Solder Versions
Solder-Type
(with Preformed Wire
Barrel/Insulation Support)
Spring, Stainless Steel
3.90
[9.91]
Min.
[ ] ^.1^.00.⁶5⁶²8²⁵8^5++––.^{...0000500202158004 Dia.}
[1.588 ]
Pin Body, Brass
1.085
[27.56]
Max.
Pin
.200
Localized Plate Area [5.08]
Min.
Pin
Socket
.825
[20.96]
Max.
Material
Contact Body and Tab—Brass
Retention Spring—Stainless steel
Finish
See chart on Page 11.
10
.530^±.010
[13.46^±0.25]
Socket
Catalog 65910
Revised 7-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject to change.
Technical Support
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 01-800-733-8926
Central America: 52-55-5-729-0425
South America: 55-11-3611-1514
www.tycoelectronics.com