3-66104-0 Datasheet, PDF (3/9 Pages) Tyco Electronics – Signal Contacts

AMP Precision Pin and Socket Contacts
Type III+, Solder Versions
(Continued)
Signal Contacts (Continued)
Spring, Stainless Steel
Solder Tab
Pin
Socket
[ ] 1^..00.5⁶⁶8²²8^55++––.^..^.000⁰²⁰5⁰⁵²0¹⁴⁰8⁰
[1.588 ]
.390
[9.91]
Min.
Pin Body, Brass
.794^±.010
[20.17^±0.25]
Localized Plate Area
.200
[5.08]
Min.
1.112
[28.24]
Max.
Pin
Spring
Stainless Steel
.020
[0.51]
.365
[9.27]
Max.
.120
[3.05]
.058
[1.47]
Material
Contact Body and Tab—Brass
Retention Spring—Stainless steel
Finish
See chart.
Ferrule, Brass,
Nickel Flash
Body
Brass
.865
[21.97]
.105
[2.67]
Solder Post
Brass
.365
[9.27]
Max.
.530^±.010
[13.46^±0.25]
Socket
Catalog 65910
Revised 7-07
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
AWG
26-20
18-16
Wire Size
Range
[mm²]
0.12-0.6
0.8-1.4
Solder
Tab
Contact
Finish
Gold/Nickel¹
Gold/Nickel¹
Duplex²
Bright Tin
Loose Piece
Contact No.
Pin
Socket
266182-1
266183-1
266180-1
266181-1
202236-7
202237-7
202236-5
202237-5
1_{.000030 [0.00076] gold in mating area over .000050 [0.00127] nickel.}
2_{Duplex plated .000030 [0.00076] gold in mating area over .000050 [0.00127] nickel on contact body; bright tin-lead}
on solder tab.
3_{Bright tin on entire contact.}
Note: These contacts can be used in Multimate contact cavities of all connector housings.
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information on page 3.
Extraction Tool Part No. 305183 (Instruction Sheet 408-1216)
Note: All part numbers are RoHS compliant except: Indicates non-RoHS compliant.
11
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject to change.
Technical Support
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 01-800-733-8926
Central America: 52-55-5-729-0425
South America: 55-11-3611-1514
www.tycoelectronics.com