English
Language : 

3-66104-0 Datasheet, PDF (1/9 Pages) Tyco Electronics – Signal Contacts
AMP Precision Pin and Socket Contacts
Type III+, Crimp, Snap-In
Signal Contacts
[.0625
+.0010
–.0020
[ ] 1.588+–00..002551
Dia.
Pin Body Spring, Stainless Steel
Spring,
Stainless Steel
Pin
.390
[9.91]
Min.
Ferrule, Brass,
Nickel Flash
.113 Max.
[2.87] Dia.
Socket
Material and Finish — See chart.
Contact Body—Brass or phosphor bronze
Retention Spring—Stainless steel
Pin
Application Tooling—Page 29
Technical Documents
114-10004 Application Specification
108-10042 Product Specification
.530±.010
[13.46±0.25]
Socket
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information on page 8.
Wire Size
Range
AWG
mm2
Ins.
Dia.
Range
Contact
Finish
Strip Form
Contact No.
Pin
Socket
Loose Piece
Contact No.
Pin
Socket
Tooling Part No.**
Loose Piece
Hand Tool
Strip Form
Applicators
30-28
0.05-0.09
30-26
0.05-0.15
26-24
0.12-0.2
24-20
0.2-0.6
.015-.030
0.38-0.76
.040-.0601
1.02-1.52
.014-.0301
0.36-0.76
.035-.0551
0.89-1.40
.040-.0801
1.02-2.03
.060-.120 5
1.52-3.05
Gold/Nickel2
Sel. Gold/Nickel3
Bright Tin
Gold/Nickel2
Sel. Gold/Nickel3
Gold/Nickel2
Sel. Gold/Nickel3
Bright Tin
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
Bright Tin
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
Bright Tin
Sel. Gold/Nickel3
788085-3
788085-1
1-66425-2
66425-7
66425-8
66393-7
66393-8
1-66106-5
66106-7
66106-8
—
2-66102-5
66102-8
66102-9
2-66102-27
—
1-66564-2
66564-8
788088-2
788088-1
1-66424-1
66424-7
66424-8
66394-7
66394-8
1-66108-5
66108-7
66108-8
66108-1
3-66104-0
66104-8
66104-9
2-66104-37
66104-1
1-66563-1
66563-8
—
788085-4
—
66429-3
66429-4
—
66406-4
1-66107-1
66107-3
66107-4
—
1-66103-8
66103-3
66103-4
—
—
66566-7
66566-4
—
788088-3
—
66428-3
66428-4
—
66405-4
1-66109-7
66109-3
66109-4
66109-1
1-66105-9
66105-3
66105-4
—
66105-1
66565-7
66565-4
90716-1
91515-16
90225-2 6
91515-16
or
58495-1*
91515-16
or
58495-1*
91542-16
567867-1***
or 567947-1***
or 680602-□***
466598-□***
466585-3***
466321-□***
or
466908-2***
466323-□***
or
466907-2***
466383-4***
or 466979-1***
or 567363-□***
.080-.1001
2.03-2.54
Bright Tin
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
1-66332-4
66332-7
66332-8
—
1-66331-4
66331-7
66331-8
66331-2
1-66400-0
66400-3
66400-4
—
1-66399-0
66399-3
66399-4
66399-2
91523-16
or
90225-2 6
466324-□***
or
466942-1***
18-16
0.8-1.4
.080-.1001
2.03-2.54
Bright Tin
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
1-66098-9S
1-66098-8
66098-8
66098-9
66098-6
1-66100-9
66100-8
66100-9
—
1-66099-5
66099-3
66099-4
66099-1
1-66101-9
66101-3
66101-4
—
91505-16 or
91523-16 or
58495-1*
466325-□***
or
466906-1***
18-14
0.8-2.0
.080-.1001
2.03-2.54
.110-.150 5
2.79-3.81
Bright Tin
Phos Bronze
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
Bright Tin
Sel. Gold/Nickel3
1-66359-4
1-66359-5
66359-9
1-66359-0
1-66359-2
—
66597-8
66597-2
1-66358-6
1-66358-8
66358-9
1-66358-0
1-66358-3
66358-1
66598-9
1-66598-0
66598-2
1-66361-2
1-66359-5
66361-3
66361-4
66361-8
—
66602-8
66602-2
1-66360-2
1-66358-8
66360-3
66360-4
66360-8
66360-1
66601-9
66601-2
91519-16
91521-16
466326-□***
or
466923-2***
466958-1***
or
567364-□***
1Overall insulation crimp diameter, including crimp barrel, must not
exceed .125 [3.18].
2.000015 [0.00038] gold in the mating area over .000050 [0.00127]
min. nickel.
3.000030 [0.00076] gold in the mating area, with gold flash on remain-
der, over .000050 [0.00127] min. nickel.
4.000030 [0.00076] gold in the mating area, with gold gradient on
remainder, over .000050 [0.00127] min. nickel.
Note: All part numbers are RoHS compliant.
5Contacts can ONLY be used in: Metrimate; CPC Series 1 (Arr. 23-
24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
6To use with the 626 Pneumatic Tool: remove crimping head from Straight
Action Hand Tool (SAHT), order SAHT Adapter Part No. 217201-1,
Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without),
and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot
actuated).
7Phosphor Bronze
SStandard reeling of strip form contacts.
*Commercial PRO-CRIMPER II hand tool for field repair only. Note:
Die Set can be adapted for use with 626 Pneumatic Tool System.
Insertion Tool Part No. 91002-1 (for insulation diameters .070 [1.78]
or less), No. 200893-2 (for insulation diameters .090 [2.29] max.).
Extraction Tool Part No. 305183. (Instruction Sheet 408-1216)
**There are power options available for these tools/dies. See Battery
Powered Crimp tool Kit and SDE Electric Terminator on page 30.
***Call Technical Support for Machine Applicator Part Numbers.
Catalog 65910
Revised 7-07
9
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject to change.
Technical Support
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 01-800-733-8926
Central America: 52-55-5-729-0425
South America: 55-11-3611-1514
www.tycoelectronics.com