1-207303-3 Datasheet, PDF (38/51 Pages) Tyco Electronics – AMP Circular Connectors for Commercial Signal & Power Applications

AMP Circular Connectors for
Note: All part numbers
Commercial Signal and Power Applications ^{are RoHS Compliant.}
CPC Connector Accessories
Cable Clamps
Cable clamps provide strain
relief and can be used on
all series receptacles and
plugs.
Material
Black thermoplastic heat-stabilized,
fire-resistant, self-extinguishing, UL
94V-0 rated
Standard Size
A
±.025
[±0.64]
Dia.
Clamping
Insert
Plug
(See Note 3)
B
±.030
[±0.76]
Clamping
Insert
Cable
Clamp
The clamping area can be
adjusted by reversing the
clamping insert as shown
below.
Shell
Size
11
13
17
23
Dimensions
A
B
.825
20.96
.950
24.13
1.125
28.58
1.600
40.64
1.250
31.75
1.400
35.56
1.400
35.56
1.555
39.5
Cable
O.D.
(Max.)
.329
8.36
.453
11.51
.453
11.51
.703
17.86
Thread
Size
5/8-24 UNEF-2B
3/4-20 UNEF-2B
15/16-20 UNEF-2B
1-3/8-18 UNEF-2B
Part No.
Individually
Packaged
Bulk
Packaged*
1-206062-4
1-206062-7**
(400)
206966-7
206966-9**
(200)
206070-8
1-206070-0**
(200)
206138-8
1-206138-0**
(100)
**Numbers in parentheses specify, in multiples, the minimum quantity of parts that can be ordered.
**Packaging includes two screws: shell sizes 11-17, screw length .500 [12.7]; shell size 23, screw length .625 [15.88].
Notes: 1. Clamping areas adjustable by inverting or changing clamping inserts. The quantity of inserts supplied with
each assembly is as follows: for size 11 cable clamps, one insert; for all other cable clamps, two inserts.
Notes: 2. Components for all cable clamps are packaged unassembled. This includes the cable clamp, two screws
and the clamping inserts.
Notes: 3. Cable clamps can be threaded directly onto plugs or receptacles, or onto back-shell extenders (page 40).
4. Replacement screws are available in the following sizes: 3/8 in. [9.52]—5019024-1, 1/2 in. [12.7]—
5019024-2, 5/8 in. [15.88]—5019024-3, 1 in. [25.4]—5019024-4, 3/4 in. [19.05]—5019024-5.
Notes: 5. Cable clamp inserts not sold separately.
Large Size
Clamping
Insert
Clamping
Insert
A
±.025
[±0.64]
Dia.
Plug
(See Note 3)
B
±.030
[±0.76]
Cable
Clamp
For additional information
concerning cable clamps, refer
to Instruction Sheet
408-7582.
Shell
Size
11
13
17
23
Dimensions
A
B
.850
21.59
1.131
28.73
1.131
28.73
1.600
40.64
1.450
36.83
1.655
42.04
1.655
42.04
1.655
42.04
Cable
O.D.
(Max.)
.453
11.51
.703
17.86
.703
17.86
1.125
28.58
Thread
Size
5/8-24 UNEF-2B
3/4-20 UNEF-2B
15/16-20 UNEF-2B
1-3/8-18 UNEF-2B
Part No.
Individually
Packaged
Bulk
Packaged*
206358-5
206358-6**
(200)
207008-5
207008-6**
(100)
206322-9
1-206322-0**
(100)
206512-5
206512-6**
(75)
**Numbers in parentheses specify, in multiples, the minimum quantity of parts that can be ordered.
**Packaging includes two screws: shell size 11, screw length .500 [12.7]; shell sizes 13-23, screw length .625 [15.88].
Notes: 1. Clamping areas adjustable by inverting or changing clamping inserts. The quantity of inserts supplied with
each assembly is as follows: for size 23 cable clamps, four inserts; for all other cable clamps, two inserts.
Notes: 2. Components for all cable clamps are packaged unassembled. This includes the cable clamp, two screws
and the clamping inserts.
Notes: 3. Cable clamps can be threaded directly onto plugs or receptacles, or onto back-shell extenders (page 40).
4. Replacement screws are available in the following sizes: 3/8 in. [9.52]—5019024-1, 1/2 in. [12.7]—
5019024-2, 5/8 in. [15.88]—5019024-3, 1 in. [25.4]—5019024-4, 3/4 in. [19.05]—5019024-5.
Notes: 5. Cable clamp inserts not sold separately.
38
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341