6450150-3 Datasheet, PDF (35/52 Pages) Tyco Electronics – MULTI-BEAM XL and MULTI-BEAM XLE Power Distribution Connector Systems

Power Connectors & Interconnection Systems
How to Specify Your Modular FLATPAQ Connector
In order to build your Modular FLATPAQ connector, it is necessary to specify all application-specific requirements such
as required modules, their order, termination, and sequencing. For this purpose, a Modular FLATPAQ Connector layout
form such as the one shown below is available. Just complete the form and send it to Tyco Electronics Customer Service.
We will generate a Customer Drawing for you to check and approve prior to connector production. Samples are also
available upon request.
●1 Enter your contact infor-
mation, including signa-
ture and date.
●2 Indicate the connector
layout by filling in the FP
number of each module
required in the boxes,
one per box. Use one
form per mated pair.
The left to right order
of the modules should
match the mating face
views of the connector.
When laying out right-
angle assemblies, make
sure that you look at the
mating face with the
termination tails facing
downwards.
●3 For solder terminated
assemblies, indicate the
tail length for each half
of the connector using
the checkboxes to the
right of the layout grid.
Sample Modular FLATPAQ Connector Layout Form
Instructions
1. Indicate the connector layout by filling in the FP number of each mod-
ule required in the boxes, one per box. Use one form per mated pair.
Company
ENTER CUSTOMER INFORMATION
Location
2. The left to right order of the modules should match the mating face
Contact Name
Title
views of the connector. When laying out right-angle assemblies,
make sure you look at the mating face with the termination tails facing ^Telephone
Fax
downwards.
3. For solder terminated assemblies, indicate the tail length for
Email Address
each half of the connector using the checkboxes to the right of the
I am: ❏ End user
layout grid.
❏ Contract manufacturer (end user:
)
4. Sign, date and send the completed form to your local Tyco Electronics ^Signature
Today’s Date
Sales Engineer.
Annual Quantity Required
Upon receipt of this form, Tyco Electronics will generate a Customer
Drawing for you to check and approve prior to connector production.
Submit to your local Tyco Electronics Sales Engineer.
Write the “FP” numbers to indicate the layout of one half of the connector assembly, matching the left to right order with the mating face view of the connector (right-angle assembly tails facing downwards).
FP FP FP FP FP FP FP FP FP FP FP FP FP FP
Solder Tail Options
❏ .115" (2.9 mm); .062" thick boards
❏ .177" (4.5 mm); .093/.125" boards
Write the “FP” numbers to indicate the layout of the mate of the above assembly, matching the left to right order with the mating face view of the connector (right-angle assembly tails facing downwards).
FP FP FP FP FP FP FP FP FP FP FP FP FP FP
Solder Tail Options
❏ .115" (2.9 mm); .062" thick boards
❏ .177" (4.5 mm); .093/.125" boards
Right-Angle
Mount
250 V Power Modules
Signal Modules
FP151
Standard Blade
FP105
Float, Standard
FP152
Premate Blade
FP106
Float, Premate
600 V Power Modules
FP153
Postmate Blade
FP107
Float, Postmate
FP104
Hot-Plug Socket
FP512
Spacer, 250 V
FP302
24-Pin
Mounts
FP303
FP314
FP315
24-Pin Socket 6-Pin 6-Pin Socket
Guides
Straight Mount
FP155
Standard Blade
FP121
Float, Standard
FP156
Premate Blade
FP122
Float, Premate
FP157
Postmate Blade
FP123
Float, Postmate
FP120
Hot-Plug Socket
FP514
Spacer, 600 V
250 V Power Modules
FP500
FP501
Left Flange Right Flange
Mount
Mount
Signal Modules
Right-Angle
Guide Sockets
FP506 Passive
FP516 Active
FP507
Right-Angle
Passive
Guide Pin
Note: All modules
are solder tail
termination unless
indicated as
compliant Press-fit.
Select solder tail
length using check
boxes to the right of
the connector layout
grid above. 0.093"
or thicker boards
are recommended
for compliant
Press-fit termination
style. Consult
Tyco Electronics
for signal module
sequencing. See
Catalog 1773096 for
benefits of Hot-Plug
and Float options.
FP150
FP161
Socket, Solder Standard Blade
FP250
FP101
Socket, Press-fit Float, Standard
FP100
Hot-Plug, Solder
FP200
Hot-Plug, Press-fit
600 V Power Modules
FP154
FP165
Socket, Solder Standard Blade
FP254
FP117
Socket, Press-fit Float, Standard
FP116
Hot-Plug, Solder
FP216
Hot-Plug, Press-fit
FP162
Premate Blade
FP102
Float, Premate
FP163
Postmate Blade
FP103
Float, Postmate
FP166
Premate Blade
FP118
Float, Premate
FP167
Postmate Blade
FP119
Float, Postmate
FP511
Spacer, 250 V
FP513
Spacer, 600 V
FP300
FP318
FP312 FP313
24-Pin
24-Pin Socket
6-Pin 6-Pin Socket,
FP400
FP418
FP412
24-Pin, Press-fit 24-Pin Skt, Press-fit 6-Pin,
3A rated
FP413
FP301
Press-fit 6-Pin Skt,
24-Pin Skt, 3A Rated
3A, Press-fit
FP401
24-Pin Skt, 3A, Press-fit
Mounts
Guides
FP500
FP501
Left Flange Right Flange
Mount
Mount
FP502 Straight Guide Pins
Straight FP503 Passive
Passive FP515 Active, M3
Guide Socket _{FP517 Active, 4-40}
■ How to Obtain Modular FLATPAQ Connector Layout Forms
Modular FLATPAQ Connector layout forms can be obtained directly from Customer Service or through your
Tyco Electronics Sales Engineer. They can also be downloaded from the website; at http://www.tycoelectronics.com.
44
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666