6450150-3 Datasheet, PDF (20/52 Pages) Tyco Electronics – MULTI-BEAM XL and MULTI-BEAM XLE Power Distribution Connector Systems

Power Connectors & Interconnection Systems
MULTI-BEAM XL and MULTI-BEAM XLE Connectors Custom Configuration Worksheet
PCB-Mount
1
Hold
Down
D
C
B
A
2
N
1234 5N 1 2 3 4
A
B
C
Header/Plug (Right-Angle Shown)
N _Mounting
Hole
Cable-Mount
XYZ Floating
Plugs
XYZ Floating
D
C
B
A
N3 2 1
N54321 N 3 2 1
Slide-to-Lock
Squeeze-to-
Release
C
B
A
Receptacle (Vertical Shown)
Electrically Hot
To create a unique configuration for MULTI-BEAM connectors simply complete this worksheet and forward it to your Tyco Electronics sales engineer.
1. Performance Grade
MULTI-BEAM XL Connector
MULTI-BEAM XLE Connector
2. Application
Board-to-Board
Cable-to-Board
3. Gender
Plug (Male)
Receptacle (Female)
4. Orientation
Cable Only
PCB Only
Blind-Mate specify Floating or Slide-to-Lock Receptacle
Right-Angle
Vertical
Latching
5. Termination
(Cable Only) Power
Signal
8 AWG
22 AWG
10 AWG
24 AWG
12 AWG
26 AWG
14 AWG
6. Termination Style (PCB Only)
Solder Tail .135′′ [3.43 mm]
Solder Tail .165′′ [4.19 mm]
Press-Fit .120′′ [3.05 mm]
Press-Fit .135′′ [3.43 mm]
Press-Fit .165′′ [4.19 mm]
7. Mounting to PCB
Hold Downs (one on either end)
.122′′ [3.10 mm] Mounting holes (Accepts #4 screws, right-angle connectors only)
.150′′ [3.81 mm] Mounting holes (Accepts #6 screws, right-angle connectors only)
8. Select # of Contacts
Section A: (Power Contacts)
Contact Centerline Spacings:
Section B: (Signal Contacts)
Section C: (Power Contacts)
Contact Centerline Spacings:
___ Enter Power Contact Type (LP - Low Power, HP - High Power)
___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the position(s) to be loaded with Pre-mate contact (Receptacles only)
(Mate-First-Break-Last) ( i.e. #1,#3, etc.)
.200′′ [5.08 mm] (for High Power only)
.250′′ [6.35 mm] (for High Power only)
.300′′ [7.62 mm] (for High Power only)
___ Enter # of Signal Contacts (Multiples of 8 are standard, i.e. 16, 24, 32...)
___ Enter the positions with Post-Mate Contacts (Mate-Last-Break-First, Plugs only)
Note: Row A is standard (i.e. A1, A3, etc.)
___ Enter Power Contact Type (LP - Low Power, HP - High Power)
___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the positions to be loaded with Pre-Mate Contacts (Receptacles only)
(Mate-First-Break-Last, i.e. #1, #3, etc.)
.200′′ [5.08 mm] (HDP)
.250′′ [6.35 mm] (P) .300′′ [7.62 mm](ACP)
9. Additional Requirements
10. Customer Information
Name: __________________________ Company: ____________________ Location: ________________________
Phone: __________________________ Fax: __________________________________ e-mail:_________________________
(Submit to your local Tyco Electronics Sales Engineer)
MULTI-BEAM XL, MULTI-BEAM XLE, TE (logo) and TYCO ELECTRONICS are
trademarks of the Tyco Electronics group of companies and its licensors.
29
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666