6450150-3 Datasheet, PDF (25/52 Pages) Tyco Electronics – MULTI-BEAM XL and MULTI-BEAM XLE Power Distribution Connector Systems

Power Connectors & Interconnection Systems
“NEW” MINIPAK HDL Connectors
NEW
Product Facts
■ High-density, low profile,
power/signal, blind-mate
connector
■ Developed to meet next
generation 1U application
by reducing airflow
impedance
■ Design is customizable
■ Serves both solder reflow
and press-fit applications
with the same contact
Applications
■ 1U Servers
■ High End Servers
■ Telecommunications
Switches, requiring low
profile
■ Hot-pluggable power
supplies
Technical Documents
Product Specification
108-2325
Application Specification
114-13215
Tyco Electronics’ new
MINIPAK HDL connector
combines a high-density
power interface into a blind-
mateable board-to-board
connector, which stands
only 8 mm off the edge of
the printed circuit board.
The MINIPAK HDL product
consists of a right-angle
plug and right-angle recep-
tacle, which utilizes an eye
of the needle tail that can
be used in both solder
and press-fit applications.
The contact offers a current
rating of 16 amps, low con-
tact resistance, and mating
forces less than 0.3 pounds
per contact.
The connector is designed
and manufactured to be
mass-customizable, allow-
ing the customer to select a
wide array of configurations
and layouts. MINIPAK HDL
connectors also contain
three levels of mating
sequences. This product is
designed specifically for
modular hot-swappable
power distribution systems.
The MINIPAK HDL connector
offers 20% more current
density in a smaller package
than other products cur-
rently offered in the market.
Temperature Rise Chart
MINIPAK HDL
Temperature Rise Vs Current
8 Circuits 2 oz 2 Layer
70
60
50
40
30
20
10
0
0
10
20
Current DC Amperes
0 FPM
100 FPM
200 FPM
300 FPM
Power (0 FPM)
Power (100 FPM)
Power (200 FPM)
Power (300 FPM)
30
Simulated Side View of 1U Chassis
MULTIBEAM XL
Connector
MINIPAK HDL
Connector
12.60 _Airflow
[.496]
8.00
[.315]
34
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666