6450150-3 Datasheet, PDF (33/52 Pages) Tyco Electronics – MULTI-BEAM XL and MULTI-BEAM XLE Power Distribution Connector Systems

Power Connectors & Interconnection Systems
FLATPAQ Connector Product Specifications
Materials
Insulators
Power Blades
Power Sockets
Hot-Plug Power Sockets
& Active Guide Sockets
Signal Pin Contacts
Signal Socket Contacts
Passive Guide Pin
Active Guide Pin
PPA, UL 94V-0 flammability rated, color black
Copper alloy
Phosphor Bronze
Crown Bands: Beryllium Copper
Holder: Phosphor Bronze
Solder termination: Brass
Press-fit: Phosphor Bronze
1 Amp: Phosphor Bronze
3 Amp: Beryllium Copper
Brass
Copper alloy
Finishes
Contacts
Passive Guide Pin
Active Guide Pin
Selectively plated gold
(30 microinches minimum) with tin
on terminations, all over nickel
Nickel
Silver
Electrical
Current Rating
Power Contacts
Current Rating,
Hot-Plug Power Contacts
Signal Contacts, 1 Amp
Signal Contacts, 3 Amp
Contact resistance
UL
CUR/CSA
UL
CUR/CSA
UL
CUR/CSA
UL
CUR/CSA
Power
Signal
Insulation Resistance
Dielectric Strength
45 Amp
32.5 Amp
35 Amp at 250V, 50 cycles
20 Amp at 250V, 50 cycles
1 Amp, 250 VAC
1 Amp, 250 VAC
3 Amp, 250 VAC
2.5 Amp, 250 VAC
2 mΩ maximum initial, (3 mΩ maximum
after 500 cycles durability), at 35A per
MIL-STD-1344, Method 3004
15 mΩ maximum initial, (30 mΩ maximum
after 500 cycles durability), at 100mA, 20
mV, per MIL-STD-1344, Method 3002
5,000 MΩ minimum at 500VDC for 2 minutes, per
MIL-STD-1344, Method 3003
1,500 VDC for 1 minute, per MIL-STD-1344,
Method 3001
Mechanical
Insertion Force
Extraction Force
Contact Retention
(in insulator)
Durability
Operating Temperature
Recommended PCB Hole
Press-Fit Tooling
Marking
Power
Signal
4.0 lbf (17.8 N) maximum
5.0 ozf (1.4 N) maximum, using .0305″ (.775 mm)
diameter steel test pin
Power
Signal
1.0 lbf (4.4 N) minimum
0.5 ozf (0.1 N) minimum, using .0295″ (.749 mm)
diameter steel test pin
Power
Signal
10.0 lbf (44.4 N) minimum
5.0 lbf (22.2 N) minimum
500 Cycles, per MIL-STD-1344, Method 2016
-40 to +105° C
Finished hole: 0.040 +/- .0030″ dia. (1.02 +/- .08 mm dia.)
Drilled hole: 0.0453 +/- .0005″ dia. (1.15 +/- .013 mm dia.)
Copper Plate: 0.0010″ (.025 mm) min. per surface
Tin Plate: 0.0003″ (.008 mm) min. per surface
Press fixture is recommended for compliant press-fit assemblies.
Consult Tyco Electronics for tool drawing
Connectors are marked with manufacturer’s logo, part number and lot code
42
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666