MA02303GJ_1 Datasheet, PDF (2/7 Pages) Tyco Electronics – RF Power Amplifier IC For 2.5 GHz ISM

RF Power Amplifier IC
For 2.5 GHz ISM
MA02303GJ
V7
Electrical Specifications: V_DD = +3.3 V, P_IN = -2 dBm, Duty Cycle = 100 %, T_S = 37 °C³, measured on
evaluation board shown in Figure 11.
Characteristic
Frequency Range
Output Power, ƒ = 2450 MHz
Power Added Efficiency, ƒ = 2450 MHz
Current, ƒ = 2450 MHz
Current for linear operation, ƒ = 2450 MHz
Gain, ƒ = 2450 MHz, linear operation
Symbol
ƒ
P_OUT
h
I_DD
I_DD
G
Unit
MHz
dBm
%
mA
dB
Min.
2400
25.3
43
—
—
—
Typ.
—
26.5
51
265
265
29.5
Max.
2500
—
—
415
—
—
Harmonics, ƒ = 2450 MHz
Input VSWR, ƒ = 2450 MHz
Off Isolation (V_DD=0 V)
Noise Figure, ƒ = 2450 MHz
Thermal Resistance, junction to package bottom
Third Order Intercept Point
(ƒ₁=2450 MHz, ƒ₂ = 2451 MHz, P_IN = -20 dBm SCL)
Load Mismatch (V_DD = 5.5 V, VSWR = 8:1, P_IN = 0 dBm)
Stability
(P_IN = -2 to 2 dBm, V_DD = 0 to -5.5 V, Load VSWR = 5:1, all phases)
2ƒ, 3ƒ, 4 ƒ
—
—
R_TH
IP₃
—
—
dBc
Ratio
dB
dB
°C/W
dBm
—
-40
-30
—
—
2.0:1
—
40
—
—
3.6
—
—
25
—
—
43
—
No Degradation in Power Output
All non-harmonically related outputs
more than 60 dB below desired signal
3. T_S is the temperature measured at the soldering point of the downset paddle on the bottom of the IC.
MSOP-8EP (Downset Lead)
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.