MA4SW424B_15 Datasheet, PDF (2/6 Pages) M/A-COM Technology Solutions, Inc. – SP4T 24GHz PIN Diode Switch with Integrated Bias Network

MA4SW424B-1
SP4T 24GHz PIN Diode Switch with Integrated Bias Network
Rev. V1
Electrical Specifications for Switch Ports @ T_AMB +25°C
Parameter
Conditions
Units
Minimum
Typical
Insertion Loss
24 GHz
dB
-
3.0
Isolation
24 GHz
dB
37
50
Input Return Loss
24 GHz
dB
-
9
Switching Speed¹
24 GHz
nS
-
200
Maximum
3.5
-
-
-
Note 1: Switching speed is measured from 10% to 90% of detected RF signal driven by TTL compatible drivers using an RC
spiking network where R = 50 - 200Ω, and C = 390 - 560pF.
Operation of the MA4SW424B-1
Operation of the MA4SW424B-1 series PIN diode switch is achieved by the application of a D.C. current (12mA)
to the bias port of the selected insertion loss port and 0V bias for the isolated ports. The control currents should
be supplied by constant current sources.
B2
+12mA
0 Volts
0 Volts
0 Volts
D.C Bias Conditions
B3
0 Volts
+12mA
0 Volts
0 Volts
B4
0 Volts
0 Volts
+12mA
0 Volts
B5
0 Volts
0 Volts
0 Volts
+12mA
J1-J2
Low Loss
Isolation
Isolation
Isolation
RF Output Conditions
J1-J3
Isolation
Low Loss
Isolation
Isolation
J1-J4
Isolation
Isolation
Low Loss
Isolation
J1-J5
Isolation
Isolation
Isolation
Low Loss
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.