M02061 Datasheet, PDF (2/37 Pages) M/A-COM Technology Solutions, Inc. – 3.3 or 5 Volt Laser Driver

Ordering Information
Part Number
Package
Pin Confitguration
M02061-12
QFN24
DISDLY function on pin 8
M02061G-12*
QFN24 (RoHS Compliant)
DISDLY function on pin 8
M02061-21
QFN24
SCB function on pin 8
M02061G-21*
QFN24 (RoHS Compliant)
SCB function on pin 8
M02061-EVM
Combination Optical and Electrical Evaluation board
DISDLY function on pin 8
*The G in the part number indicates that this is an RoHS compliant package. Refer to www.mindspeed.com for additional information.
Revision History
Revision
G
F
E
D
C
Level
Release
Release
Release
Release
Preliminary
Date
July 2012
February 2010
February 2006
September
2005
March 2004
ASIC
Revision
Description
x
Added recommendation for 100 k Ω pull-up resistor at pin 14 IBIASout when pin 18
SVCC is used to control laser current.
x
Added CPRI data rates to front page.
Added T_J specification and added equation for T_A specification in Table 1-1.
x
Added information for the M02061-21 with pin SCB instead of pin DISDLY.
x
New format. Remove 32 pin package information.
Changes to Absolute Maximum Specifications - operating temperature, output voltage.
Changes to Recommended Operating Conditions - VCC, operating temperature.
Changes to DC Characteristics - ICC, VMD, TxPWRmon, logic inputs and outputs, data
inputs, safety logic thresholds.
Changes to AC Characteristics - IMOD, Tr, Tf, jitter.
x
Added eye diagram, ; corrected rise/fall times.
2.5Gbps Electrical Eye Diagram
QFN24 Pin Configuration
Conditions: 80mA modulation current, 2^7-1 PRBS
24
VCC
1
DIN+
DIN-
VCC3SEL
DIS
FAIL ⁶
7
19
GND, connect to
PCB ground
18
SVCC
OUT-
OUT+
GND 0
IBIASOUT
13
IPIN
12
4mm x 4mm
02061-DSH-001-G
Mindspeed Technologies^®
2
Mindspeed Proprietary and Confidential