M02061 Datasheet, PDF (12/37 Pages) M/A-COM Technology Solutions, Inc. – 3.3 or 5 Volt Laser Driver

Pin Definitions
Table 2-1.
4x4 mm
QFN24 Pin
Number
5
M02061 Pin Definitions and Descriptions (2 of 7)
Pin Name
Pin equivalent load
Function
DIS
V_CC
V_CC3
Bias and modulation output disable (TTL/CMOS).
7 kΩ
DIS
80 kΩ
6
FAIL
V_CC
FAIL
Safety circuit control failure output (TTL/CMOS). Goes high when a safety
logic fault is detected. This output will be low when DIS is high.
7
RESET
V_CC
Safety circuit reset. Leave open for normal operation or add a capacitor to
V_CC3
ground to extend the reset time.
Connect to GND to disable window comparators at APC_SET
RESET
190 Ω
02061-DSH-001-G
Mindspeed Technologies^®
12
Mindspeed Proprietary and Confidential