28560-DSH-001-B Datasheet, PDF (182/274 Pages) M/A-COM Technology Solutions, Inc. – HDLC Controller

Electrical and Mechanical Specification
CX28560 Data Sheet
Table 8-8. PCI I/O Measure Conditions
Symbol
Parameter
Value
Unit
V_th
V_tl
V_trise
V_tfall
V_test
V_max
—
Voltage Threshold High⁽¹⁾
Voltage Threshold Low⁽¹⁾
Voltage Rise Point
Voltage Fall Point
Voltage Test Point
Maximum Peak-to-Peak⁽²⁾
Input Signal Edge Rate
0.6 V_ddo
V
0.2 V_ddo
V
0.285 V_ddo
V
0.615 V_ddo
V
0.4 V_ddo
V
0.4 V_ddo
V
1
V/ns
NOTE(S):
(1) _{The input test is done with 0.1 Vdd of overdrive (over Vih and Vil). Timing parameters must be met with no more overdrive than}
this. Production testing can use different voltage values, but must correlate results back to these parameters.
(2) _{Vmax specifies the maximum peak-to-peak voltage waveform allowed for measuring input timing. Production testing can use}
different voltage values, but must correlate results back to these parameters.
Figure 8-2. PCI Output Timing Waveform
Vth
PCLK
Vtest
Vtl
T _val
Output
Delay
Vtest _{(3.3 V signaling)}
Three-state
Output
output current < leakage current
T_on
T_off
500031A_002
8-6
Mindspeed Technologies™
28560-DSH-001-B
Advance Information