English
Language : 

L130-2780002011001 Datasheet, PDF (15/24 Pages) Lumileds Lighting Company – Hot targeted leading lm/$ QFN with superior lumen maintenance
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and
forward voltage (Vf).
Decoding Product Bin Labeling
LUXEON mid-power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.
Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given
application.
Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 5700K, 6500K emitters are labeled with a four digit alphanumeric
CAT code following the format below.
ABCD
Where:
A—
B & C—
D—
Flux bin (L etc.)
Color bin (For example 2700K 80CRI has the following 9 color bins: 8D, 8E, 8F, 8G, 8H, 8J, 8K, 8L, 8M)
V bin
f
Luminous Flux Bins
Table 7 and Table 8 list the standard photometric luminous flux bins for LUXEON mid-power emitters (tested and
binned at 120 mA). Although several bins are outlined, product availability in a particular bin varies by production
run and by product performance. Not all bins are available in all colors. Please contact your Philips Lumileds
representative for the L130-xx80002011001 flux bins.
Flux Bins
Table 7. Flux Bins for L130-xx80002011001
Bin Code
M
P
Q
R
S
T
U
Note for Table 7:
1. Tested and binned at 25°C, If = 120 mA. Tester tolerance: ± 7.5%.
Minimum Photometric Flux (lm)
36
40
44
48
52
56
60
Maximum Photometric Flux (lm)
40
44
48
52
56
60
65
LUXEON 3020 Datasheet DS209 20140320 ©2014 Philips Lumileds Lighting Company.
14