LTC3703-5_15 Datasheet, PDF (31/32 Pages) Linear Technology – 60V Synchronous Switching Regulator Controller

LTC3703-5
PACKAGE DESCRIPTIO
GN Package
16-Lead Plastic SSOP (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1641)
.045 ±.005
.189 – .196*
(4.801 – 4.978)
16 15 14 13 12 11 10 9
.009
(0.229)
REF
.254 MIN
.150 – .165
.229 – .244
(5.817 – 6.198)
.150 – .157**
(3.810 – 3.988)
.0165 ± .0015
.0250 BSC
RECOMMENDED SOLDER PAD LAYOUT
.007 – .0098
(0.178 – 0.249)
.015 ± .004
(0.38 ± 0.10)
× 45°
0° – 8° TYP
1 234 5678
.0532 – .0688
(1.35 – 1.75)
.004 – .0098
(0.102 – 0.249)
.016 – .050
(0.406 – 1.270)
NOTE:
1. CONTROLLING DIMENSION: INCHES
2.
DIMENSIONS
ARE
IN
INCHES
(MILLIMETERS)
3. DRAWING NOT TO SCALE
.008 – .012
(0.203 – 0.305)
TYP
.0250
(0.635)
BSC
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
GN16 (SSOP) 0204
G Package
28-Lead Plastic SSOP (5.3mm)
(Reference LTC DWG # 05-08-1640)
1.25 ±0.12
9.90 – 10.50*
(.390 – .413)
28 27 26 25 24 23 22 21 20 19 18 17 16 15
7.8 – 8.2
5.3 – 5.7
7.40 – 8.20
(.291 – .323)
0.42 ±0.03
RECOMMENDED SOLDER PAD LAYOUT
5.00 – 5.60**
(.197 – .221)
0.65 BSC
1 2 3 4 5 6 7 8 9 10 11 12 13 14
2.0
(.079)
MAX
0° – 8°
0.09 – 0.25
(.0035 – .010)
0.55 – 0.95
(.022 – .037)
NOTE:
1. CONTROLLING DIMENSION: MILLIMETERS
2.
DIMENSIONS
ARE
IN
MILLIMETERS
(INCHES)
3. DRAWING NOT TO SCALE
0.65
(.0256)
BSC
0.22 – 0.38
(.009 – .015)
TYP
*DIMENSIONS DO NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED .152mm (.006") PER SIDE
**DIMENSIONS DO NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED .254mm (.010") PER SIDE
0.05
(.002)
MIN
G28 SSOP 0204
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
37035fa
31