LTC4040_15 Datasheet, PDF (24/26 Pages) Linear Technology – 2.5A Battery Backup Power Manager

LTC4040
Package Description
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
UFD Package
24-Lead Plastic QFN (4mm × 5mm)
(Reference LTC DWG # 05-08-1696 Rev A)
0.70 ±0.05
4.50 ±0.05
3.10 ±0.05
2.00 REF
2.65 ±0.05
3.65 ±0.05
PACKAGE OUTLINE
0.25 ±0.05
0.50 BSC
3.00 REF
4.10 ±0.05
5.50 ±0.05
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED
4.00 ±0.10
(2 SIDES)
0.75 ±0.05
PIN 1
TOP MARK
(NOTE 6)
5.00 ±0.10
(2 SIDES)
R = 0.05 TYP
2.00 REF
R = 0.115
TYP
23
PIN 1 NOTCH
R = 0.20 OR C = 0.35
24
0.40 ±0.10
1
2
3.00 REF
3.65 ±0.10
2.65 ±0.10
0.200 REF
0.00 – 0.05
(UFD24) QFN 0506 REV A
0.25 ±0.05
0.50 BSC
BOTTOM VIEW—EXPOSED PAD
NOTE:
1. DRAWING PROPOSED TO BE MADE A JEDEC PACKAGE OUTLINE MO-220 VARIATION (WXXX-X).
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION
ON THE TOP AND BOTTOM OF PACKAGE
4040fa
24
For more information www.linear.com/LTC4040