LTC3124_15 Datasheet, PDF (15/28 Pages) Linear Technology – 15V, 5A 2-Phase Synchronous Step-Up DC/DC Converter with Output Disconnect

LTC3124
APPLICATIONS INFORMATION
7. Keep the connections from the resistor divider to the
FB pin and from the compensation components to the
VC pin as short as possible and away from the switch
pin connections.
Top Layer
8. Crossover connections should be made on inner cop-
per layers if available. If it is necessary to place these
on the ground plane, make the trace on the ground
plane as short as possible to minimize the disruption
to the ground plane (see Figure 6, 3rd layer).
2nd Layer
3rd Layer
Bottom Layer (Top View)
Figure 6. Example PCB Layout
For more information www.linear.com/LTC3124
3124f
15