PIM400 Datasheet, PDF (2/20 Pages) Lineage Power Corporation – -36 to -75 Vdc; 400W/10A

GE
PIM400 Series; ATCA Board Power Input Modules
-36 to -75 Vdc; 400W/10A
ATCA Board Typical Application
Data Sheet
External Holdup Capacitor Selection
External Holdup Trim Resistor Selection
Suggested Bill of Materials
(Note: Customer is ultimately responsible for the final selection and verification of the suggested parts for the end application).
Ref Des
Description
(Values)
Comments
F1-F4
F5,F6
R1,R2
R_TRIM
R_PULLUP
C_FLTR
C_HLDP
C_OUT
C_EMI
Fuses (15A)
Fuses (15A)
Pre-charge Resistors (15 Ohms)
Resistor
Resistor (3.3 kOhms)
Capacitor(s) (100F)
Capacitor(s)
Capacitor(s)
Capacitors
Max fuse rating not to exceed 20A, fast acting
0.5 to 1A rated
High Surge Power Type e.g. KOA P/N SG73
See Design Consideration section for details
Alarm pull-up resistor
270 F (max)
3300F (max); see Design Consideration section for details
Consult data sheet for the applicable DC/DC Bus Converter
See Design Consideration section for details
June 20, 2013
©2013 General Electric Company. All rights reserved.
Page 2