PIM400 Datasheet, PDF (1/20 Pages) Lineage Power Corporation – -36 to -75 Vdc; 400W/10A

GE
Data Sheet
PIM400 Series; ATCA Board Power Input Modules
-36 to -75 Vdc; 400W/10A
Applications
 ATCA Front Board / Blade
 Central Office Telecom equipment
 High availability server and storage applications
Options
 Choice of short pin lengths
 I²C Digital Interface
Features
 -48V/10A Dual redundant input power distribution
 3.3Vdc/3.6A & 5.0Vdc/150mA of isolated Management Power
for IPM or other housekeeping functions
 Independent holdup capacitor charging voltage; trimmable
from 50 to 95Vdc for optimal real estate
 OR’ing functionality, Inrush protection & hot swap capability
 Integral EMI filter designed for the ATCA board to meet CISPR
Class B with minimal external filtering
 Protection: Reverse polarity, under voltage, input transient
over voltage/current and temperature
 I²C digital interface options
 Isolated A/B Feed Loss /Open Fuse Alarm
 High efficiency : 98%
 -40 to 85ºC ambient temperature operation
 Industry Standard Quarter brick size: 58.4 mm x 36.8 mm x
13.7 mm (2.3 in x 1.45 in x 0.54 in)
 MTBF : 2,308,563 hours per TELCORDIA
 ISO** 9001 & ISO 14001 certified manufacturing facilities
 Compliant to RoHS II EU “Directive 2011/65/EU”
 UL* 60950-1, 2nd Ed. Recognized, CSA† C22.2 No. 60950 1-07
Certified, and VDE^‡ (EN60950-1, 2nd Ed.) Licensed
 Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE 802.3^¤ PoE
standards
 ISO**9001 and ISO 14001 certified manufacturing facilities
Description
The PIM400 series of Power Input Modules are designed to greatly simplify the task of implementing dual redundant, hot swap –
48Vdc power distribution with EMI filtering on an ATCA or other telecom boards. The PIM400 with optional I²C digital interface
capability, when used with a variety of GE’s series of Bus converters (Barracuda^TM Series) /POLs (DLynx^TM Series) provides for a
quick, simple and elegant power solution to a wide variety of demanding & intelligent power system architectures.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† _{CSA is a registered trademark of Canadian Standards Association.}
‡ _{VDE is a trademark of Verband Deutscher Elektrotechniker e.V.}
** ISO is a registered trademark of the International Organization of Standards
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
June 20, 2013
©2013 General Electric Company. All rights reserved.