English
Language : 

JNCW016A0R Datasheet, PDF (1/15 Pages) Lineage Power Corporation – 36–75 Vdc Input; 28Vdc Output; 16Adc Output
GE
Data Sheet
JNCW016A0R Orca* Series; DC-DC Converter Power Modules
36–75 Vdc Input; 28Vdc Output; 16Adc Output
RoHS Compliant
Features
 Compliant to RoHS II EU Directive 2011/65/EC (-Z versions)
 Compliant to REACH Directive (EC) No 1907/2006
 High power density: 166 W/in3
 Very high efficiency: >93.5% Typ at Full Load
 Industry standard half-brick pin-out
 Low output ripple and noise
 Industry standard, DOSA compliant half-brick footprint
57.7mm x 60.7mm x 12.7mm
(2.27” x 2.39” x 0.5”)
 Remote Sense
 Supports repetitive loads (AC+DC) up to 2 kHz
 2:1 input voltage range
 Single tightly regulated output
Applications
 RF Power Amplifier
 Wireless Networks
 Switching Networks
 Constant switching frequency
 Constant Current Overcurrent limit
 Latch after short circuit fault shutdown
 Over temperature protection auto restart
 Output voltage adjustment trim, 16.0Vdc to 35.2Vdc
 Wide operating case temperature range (-40°C to 100°C)
 CE mark meets 2006/95/EC directives§
Options
 Output OCP/OVP auto restart
 Shorter pins
 Unthreaded heatsink holes
 ANSI/UL# 60950-1, 2nd Ed. Recognized, CSA† C22.2 No. 60950-
1-07 Certified, and VDE‡ 0805-1 (EN60950-1, 2nd Ed.) Licensed
 ISO** 9001 and ISO 14001 certified manufacturing facilities
 Compliant to IPC-9592A, Category 2, Class II
 Tunable Loop* for transient response optimization
Description
The JNCW016A0R ORCA series of dc-dc converters are a new generation of isolated, very high efficiency DC/DC power modules
providing up to up to 16Adc output current at a nominal output voltage of 28Vdc in an industry standard, DOSA compliant half-
brick size footprint, which makes it an ideal choice for high voltage and high power applications. Threaded-through holes are
provided to allow easy mounting or addition of a heatsink for high-temperature applications. The output is fully isolated from the
input, allowing versatile polarity configurations and grounding connections. This module contains an optional new capability, the
Tunable Loop, that allows the user to optimize the dynamic response of the converter to match the load with reduced amount of
output capacitance, leading to savings on cost and PWB area.
* Trademark of General Electric Company
# UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
August 14, 2013
©2012 General Electric Company. All rights reserved.
Page 1