HO60-P Datasheet, PDF (1/15 Pages) LEM – Current Transducer

Current Transducer HO-P series
I_PN = 60, 100, 120, 180, 240, 250 A
Ref: HO 60-P, HO 100-P, HO 120-P, HO 180-P, HO 240-P, HO 250-P
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation
between the primary and the secondary circuit.
Features
●● Open loop multi-range current transducer
●● Voltage output
●● Single power supply +5 V
●● Over-current detect 2.93 × I_PN (peak value)
●● EEPROM Control
●● Galvanic separation between primary and secondary circuit
●● Low power consumption
●● Compact design for THT PCB mounting
●● Aperture: 15 × 8 mm
●● Factory calibrated
●● Dedicated parameter settings available on request
(see page 12).
Advantages
●● Low offset drift
●● Over-drivable V_ref
●● 8 mm creepage/clearance
●● Fast response.
Applications
●● AC variable speed and servo motor drives
●● Static converters for DC motor drives
●● Battery supplied applications
●● Uninterruptible Power Supplies (UPS)
●● Switched Mode Power Supplies (SMPS)
●● Power supplies for welding applications
●● Combiner box
●● MPPT.
Standards
●● EN 50178: 1997
●● IEC 61010-1: 2010
●● IEC 61326-1: 2012
●● UL 508: 2010.
Application Domain
●● Industrial.
N°97.K4.27.000.0; N°97.K4.34.000.0; N°97.K4.36.000.0; N°97.K4.42.000.0; N°97.K4.D4.000.0; N°97.K4.45.000.0
16July2015/Version 5
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice
Page 1/15
www.lem.com