U5303A Datasheet, PDF (8/16 Pages) Keysight Technologies – PCIe High-Speed Digitizer with On-Board Processing

08 | Keysight | U5303A PCIe High-Speed Digitizer with On-Board Processing - Data Sheet
Application Options¹
For specific applications the U5303A PCIe high-speed digitizer
can be configured with specific options:
–– CB0: Digitizer streaming and recording
–– CB1: Digital down converter streaming and recording at
1 GS/s
–– CB2: Digital down converter streaming and recording at
1.6 GS/s
–– SS1²: Swept source OCT application at 500 MS/s
–– SS2²: Swept source OCT application at 1 GS/s
–– BB1²: High fidelity digitizer
–– FT1: Fast Fourier Transform (FFT)
CB0 digitizer streaming and recording
CB0 is a turnkey reference bundle, based on the CSR architecture
for continuous gapless acquisition, implementing a real time
digitizer data recorder. It includes a command line application
ensuring performance of up to 2.4 GB/s in a specific qualified
system. An easy to use data viewer application is also provided.
This digitizer streaming and recording option with bundled
applications provides:
–  Guaranteed recording specification
–  Various recording speed controlled by application
–  Adaptable sampling rate (decimation and external clock)
–  Data throughput optimization (12-bit, 10-bit or 8-bit mode).
This option is using a U5303A pre-configured version composed:
–  Full bandwidth (-F10)
–  4 GB acquisition memory (-M40)
–  LX195T DPU FPGA
–  Digitizer firmware (-DGT)
It is available with two sampling rates:
–– 1 GS/s sampling rate (-SR1)
–– 1.6 GS/s sampling rate (-SR2)
The digitizer data streamer application is an intuitive command
line application which allows to control the U5303A and adapt its
data rate to the target application.
The data viewer is a simple graphical user interface (GUI)
application which allows to read, display, select and export the
data stored.
Maximum streaming and recording performance is guaranteed
using an additional qualified host computer system with specific
storage devices configuration.
Keysight proposes full system and installation services. Please
contact support at [e-mail] for additional
information.
CB1/CB2 digital down-conversion streaming and
recording
These two bundles enable continuous gapless acquisition,
implementing:
–– Digital down converter functionality in real time
–– Data steaming to host
–– Multichannel recording to disk all I/Q samples for later
analysis.
The -CB1 option is added on top of a U5303A pre-configured
version composed of:
–– 1 GS/s sampling rate (-SR1)
–– Full bandwidth (-F10)
–– 4 GB acquisition memory (-M40)
–– Digitizer firmware (-DGT)
This option provides:
–– Guaranteed recording specification up to 200 MHz
instantaneous bandwidth (IBW) with tunable intermediate
frequency with recommended configuration.
–– Data throughput optimization (I/Q samples with 32-bit,
16-bit or 12-bit mode).
The -CB2 option is added on top of a U5303A pre-configured
version composed of:
–– 1.6 GS/s sampling rate (-SR2)
–– Full bandwidth (-F10)
–– 4 GB acquisition memory (-M40)
–– Digitizer firmware (-DGT)
This option provides:
–– Guaranteed recording specification up to 320 MHz
instantaneous bandwidth (IBW) with tunable intermediate
frequency with recommended configuration.
–– Data throughput optimization (I/Q samples with 32-bit,
16-bit or 12-bit mode).
Both options include an intuitive command line application
allowing to control the U5303A and a data viewer providing
a simple graphical user interface (GUI) which allows to read,
display, select and export the data stored.
Maximum streaming and recording performance is guaranteed
using an additional qualified host computer system with specific
storage devices configuration.
Keysight proposes full system and installation services. Please
contact support at [e-mail] for additional
information.
1. Application options are delivered on the high-speed digitizer applications DVD.
2. DGT option not available with these application options.