English
Language : 

U5303A Datasheet, PDF (2/16 Pages) Keysight Technologies – PCIe High-Speed Digitizer with On-Board Processing
02 | Keysight | U5303A PCIe High-Speed Digitizer with On-Board Processing - Data Sheet
Overview
Introduction
The U5303A is a fast 12-bit PCIe® digitizer with programmable
on-board processing, making it ideal for biotechnology,
semiconductors, and physics. The U5303A is particularly suited
for OEM applications with its fast PCI Express 2.0 eight lanes
connection.
Product description
The U5303A ADC card occupies a single full-length PCIe slot of
the host PC. Featuring sample rates of 1.6 GS/s per channel, up
to 3.2 GS/s in interleaved mode, along with an analog bandwidth
of up to 2 GHz and DDR3 acquisition memory options up to
4 GB, the U5303A includes a Xilinx Virtex-6 FPGA allowing
implementation of custom real-time processing algorithms using
the
available FPGA development kit.
The digitizer firmware included allows signal acquisition to the
on-board memory and subsequent transfer to the host PC via the
PCIe bus.
The U5303A PCIe high-speed digitizer can also be combined with
the Keysight 89600 VSA software for advanced dual-channel
signal analysis.
For information on other firmware options please contact
Keysight Technologies: digitizers@keysight.com
Example applications
–  Medical research instrumentation (e.g. OCT)
–  Environmental monitoring (Laser and Lidar)
–  Analytical time-of-flight (TOF)
–  Ultrasonic non-destructive testing (NDT)
–  Semiconductor test
–– Radar and satellite communication applications
–– Emerging communication standards
Product features
–  1 channel with 12-bit resolution up to 3.2 GS/s sampling rate
–  2 channels up to 1.6 GS/s simultaneous sampling rate
–  DC up to 2 GHz bandwidth
–  50 Ω input impedance, DC coupled
–  Selectable 1 V or 2 V full scale range (FSR)
–  ±200 fs channel-to-channel skew stability
–  15 ps RMS trigger time interpolator (TTI) precision
–  Up to 4 GB DDR3 on-board memory
–  On-board data processing unit using a Xilinx Virtex-6 FPGA
–  Support for loading custom real-time processing
–  PCI Express 2.0 eight lanes (x8)
–  Real-time averaging and peak detection options (-AVG/-PKD)
–– Real-time digital down-conversion (-DDC) with adjustable center
frequency and analysis bandwidth
–– Real-time digitizer raw data streaming and recording bundle (-CB0)
–– Real-time digital down-conversion with I/Q data streaming and
recording bundles (-CB1/-CB2)
–– High-speed fast Fourier transform (-FT1)
Uncompromising values
–  Fast PCIe 12-bit digitizer with on-board processing
–  Capture wide bandwidth signals
–  High dynamic range for better measurement fidelity
–  Accurate long term measurement
– Custom firmware implementation
–  Capable of switching between multiple firmware programs
–  Software support including multiple programmable interfaces for
easy integration into existing environments
–  Reduced development time, fast time to market
–  Self-trigger mode for unequaled synchronous noise reduction
–  Open FPGA for custom process
–  Continuous data streaming (-CSR)
–– Reduced test time by tuning and zooming on signals (-DDC)
–– Up to 1 GHz baseband streaming and recording (-CB0)
–– Dual channel phase coherent streaming and recording with up to
320 MHz alias protected IBW (-CB1/-CB2)
–– FFT spectrometer with high dynamic range (-FT1)