U5303A Datasheet, PDF (13/16 Pages) Keysight Technologies – PCIe High-Speed Digitizer with On-Board Processing

13 | Keysight | U5303A PCIe High-Speed Digitizer with On-Board Processing - Data Sheet
Technical Specifications and Characteristics (continued)
Environmental and physical¹
Temperature range
Altitude
EMC
Operating
Non-operating
Acoustic
Power dissipation^3,4
+ 3.3 V
0.8 A (typical)
+ 3.3 V_AUX
0.2 A (typical)
+5V
1.5 A (typical)
Mechanical characteristics
Form Factor
Size
Weight
+ 12 V
2.3 A (typical)
+ 12 V
1.5 A (typical)
Without fan
With fan
0 to +50 °C (sea-level to 10,000 feet)^2,3
0 to +45 °C (10,000 to 15,000 feet)^2,3
–40 to +70 °C
Up to 15,000 feet (4’572 meters)
Complies with European EMC Directive
–  IEC/EN 61326-1
–  CISPR Pub 11 Group 1, class A
–  AS/NZS CISPR 11
–  ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
European Machinery Directive
Acoustic noise emission
LpA < 70 dB
Operator position
Normal operation mode
Power on PCIe edge connector
31 W (typical)
Power on additional power cable⁴
26 W (typical)
PCIe x8 standard (full length with fan)
17.6 W x 126.3 H x 169.5 D mm⁵
40.6 W x 126.3 H x 252.1 D mm⁶
0.68 kg (1.49 lbs)
1.  Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the
environmental stresses of Storage, Transportation and End-use; those stresses include but are not limited to temperature, humidity, shock, vibration,
altitude and power line conditions. Test Methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3.
2.  PC internal ambient temperature at intake of the digitizer’s fan.
3.  With the Virtex-6 LX195ST DPU FPGA.
4.  Additional power cable mandatory to ensure adequate power distribution as per PCIe standard.
5.  60 m³/h airflow is required. The unit must be operated with the included fan.
6.  Additional rail guide is included to stabilize the PCIe card in the PC.