N1923A Datasheet, PDF (8/19 Pages) Keysight Technologies – Wideband Power Sensors

08 | Keysight | 8990B Peak Power Analyzer and N1923A/N1924A Wideband Power Sensors - Data Sheet
Performance Specifications
Specification definitions
There are two types of product specifications:
–– Warranted specifications are specifications which are covered by the product
warranty and apply over a range of 0 to 55 °C unless otherwise noted. Warranted
specifications include measurement uncertainty calculated with a 95% confidence.
–– Characteristic specifications are specifications that are not warranted. They
describe product performance that is useful in the application of the product. These
characteristic specifications are shown in italics.
Characteristic information is representative of the product. In many cases, it may also be
supplemental to a warranted specification. Characteristic specifications are not verified
on all units. There are several types of characteristic specifications. They can be divided
into two groups:
One group of characteristic types describes ‘attributes’ common to all products of a
given model or option. Examples of characteristics that describe ‘attributes’ are the
product weight and ‘50-ohm input Type-N connector’. In these examples, product
weight is an ‘approximate’ value and a 50-ohm input is ‘nominal’. These two terms are
most widely used when describing a product’s ‘attributes’.
Conditions
The power meter and sensor will meet its specifications when:
–– Stored for a minimum of two hours at a stable temperature within the operating
temperature range, and turned on for at least 30 minutes.
–– The power meter and sensor are within their recommended calibration period.
–– Used in accordance to the information provided in the User’s Guide.