U2044XA Datasheet, PDF (7/25 Pages) Keysight Technologies – U2040 X-Series Wide Dynamic Range Power Sensors

07 | Keysight | U2040 X-Series Wide Dynamic Range Power Sensors – Data Sheet
U2049XA: The Ideal Solution for Remote
Monitoring of Satellite Systems
Get the same accuracy and performance in thermal vacuum (TVAC) chambers with the
world’s first TVAC qualified power sensor. With best-in-class long term drift performance,
a frequency range of 10 MHz to 33 GHz and a dynamic range spanning 90 dB, the
U2049XA LAN power sensor is ideal for fault detection and monitoring of satellite
systems. And with LAN/power over Ethernet (PoE) connectivity, a first in the industry,
you can perform long distance, remote monitoring of satellite systems with ease and
confidence.
LAN/Power over ethernet connectivity
Overcome the cable length limitations associated with USB connectivity. With Power
over Ethernet (PoE)/LAN connectivity, the U2049XA is capable of long distance remote
monitoring of up to 100 meters. The PoE connectivity is also compliant to the IEEE
802.3af or 802.3at Type 1 standards.
Note that the typical LAN port found on a PC or Keysight instruments will not be able
to power up the U2049XA sensor. A typical LAN port is only used for data transfer and
communication. The U2049XA must connect to a PoE port, which can be used to supply
the DC power required to power up the sensor and to transfer data.
Broad frequency coverage
With a broad frequency coverage of 10 MHz to 33 GHz, the U2049XA is optimized for
satellite and aerospace/defense applications. Together with internal zero and calibration
and excellent long term drift performance, the U2049XA enables automated performance
monitoring without needing human intervention.
Optional thermal vacuum option
The U2049XA LAN power sensor comes with a thermal vacuum option (Option-TVA) for
use within a thermal vacuum chamber. This option has been meticulously designed by
selecting components with minimum outgassing properties. Each of the sensors is also
subject to temperature cycling in a vacuum chamber to stabilize the materials and to
remove outgassing particles.
Figure 4. U2049XA Option 100
Figure 5. U2049XA Option TVA