|
U2781A Datasheet, PDF (54/76 Pages) Keysight Technologies – USB Modular Products | |||
|
◁ |
U2722A/U2723A USB Modular Source Measure Unit
Features
ââ Three-channel SMU
ââ Four-quadrant operation (±20 V)
ââ Maximum current output of 120
mA per channel
ââ Embedded test script (able to
support three channels with
coherent source and measurement
capabilities) (for U2723A)
ââ IV Curve application support in the
Keysight Measurement Manager
software (for U2723A)
ââ Faster rise/fall time (for U2723A)
ââ High measurement sensitivity of
100 pA with 16-bit resolution
ââ 0.1% basic accuracy
ââ Low current measurement
capability down to nA levels
ââ Voltage and current programming/
readback
ââ USB 2.0 and USBTMC-USB488
standards
ââ Command logger function
ââ Wide range of Application
Development Environments (ADEs)
compatibility
ââ Standalone and modular
ââ SCPI and IVI-COM supported
Introduction
The Keysight U2722A/U2723A USB modular source measure unit is more than
just a power supply â it has fast response time, and has voltage and current
programming/readback with high accuracy measurement capabilities. The
U2722A and its enhanced version, the U2723A are capable of four-quadrant
operation, acting as current source and also as current sink (load) with both
polarities of the output voltage. The U2723A offers additional features such as
embedded test scripts to simplify automated testing and faster rise time to help
improve throughput during mass testing of semiconductor component.
Increases productivity and accuracy in automated testing
ââ Four-quadrant operations well suited for a wide range of test applications
with just a single SMU
ââ High measurement
sensitivity of 100 pA with
16-bit resolution allowing
you to source and measure
down to pico levels
ââ 0.1% accuracy for getting
more accurate analysis and
measurement results
ââ Flexible standalone or
modular capability enables you to have lower startup cost
ââ SCPI and IVI-COM supported and a wide range of ADEs compatibility
minimize your work time and increase software options
ââ Easy-to-use KMM software that includes the command logger function
that helps you easily convert SCPI commands into snippets of VEE, VB,
C++, and C# code
Memory List
The U2723A USB Modular Source
Measure Unit provides an embedded
test script to help you pre-define
test configurations or duplicate tests
easily without spending too much
time on programming.
Each channel in the U2723A USB
Modular Source Measure Unit
is allocated two memory lists,
each capable of storing up to 200
commands and results individually.
Stored commands in active memory
will be executed accordingly while
the measurement results obtained
are automatically stored in the result
buffer.
Four-quadrant operations with high measurement sensitivity
and accuracy
The U2722A/U2723A SMU is a versatile device that allows you to perform
sweep and measurement from different operating regions with just a single
device without extra configurations. The four quadrant-operation (±20 V)
makes the U2722A/U2723A well suited for a wide range of test applications
including leakage measurement, solar cell measurement, forward/reverse
voltage, curve tracer transistor, and many others. Besides being versatile, the
U2722A/U2723A offers high measurement sensitivity with 16-bit resolution and
accuracy that allows you to obtain more accurate analysis and measurement
results.
54
|
▷ |