33621A Datasheet, PDF (4/24 Pages) Keysight Technologies – Trueform Waveform Generators

04 | Keysight | M33600A Series Trueform Waveform Generators - Data Sheet
Unmatched capabilities for generating a full range of signals for the most
demanding requirements
The 33600A Series waveform generators offer the common signals
and features you expect, such as modulation, sweep and burst.
However, it also offers features that give you the capabilities and
lexibility you need to get your job done quickly, no matter how
complex. An intuitive front-panel user interface, for example, can be
quickly and easily relearned when your attention has been focused
elsewhere. Built-in LAN, USB and optional GPIB interfaces allow
you to easily control your instruments or transfer waveforms to your
instrument. And that’s just the beginning.
The 33600A Series waveform generators offer a variety of capabilities
you can’t ind anywhere else—capabilities designed to help you
accelerate your testing and get your project wrapped up faster:
Waveform summing and combining capability
Easily add noise to your signal for margin and distortion testing
using only a single channel. You can create dual-tone
multifrequency signals without a dual-channel generator, which
means you can preserve your budget for other test needs. On a
two-channel model, you can sum and combine up to four signals.
Variable-bandwidth noise
You can adjust the bandwidth of the built-in noise generator to
control the frequency content of your signal. Apply just the frequency
stimulus you need so you concentrate the energy of your waveform
in frequency bands-of-interest.
Dual-tone signal created by summing waveforms using the
modulation type “Sum.”
The images at right show an
approximate 10 dB increase in
amplitude at 50 kHz when the
bandwidth is reduced 10x. Note
how the signal energy is increased
in the frequencies-of-interest when
the bandwidth is reduced, instead
of being spread over a very wide
bandwidth with lower amplitude at
all frequencies.