33621A Datasheet, PDF (20/24 Pages) Keysight Technologies – Trueform Waveform Generators

20 | Keysight | M33600A Series Trueform Waveform Generators - Data Sheet
Speciications (continued)
Modulation input
Connector
Assignment
Voltage level (nom)
Input Impedance (nom)
Bandwidth (−3 dB) (typ)
Rear-panel BNC, shell and pin isolated from chassis (±42 V maximum)
Channel 1, Channel 2, or both
±1 V or ±5 V full scale, selectable
5 kΩ
0 Hz to 100 kH
External trigger/gate input/output
General characteristics
Connector
Assignment: Input
Output
Polarity
Maximum Rate
Input characteristics
Threshold voltage (nom)
Impedance (nom)
Minimum pulse width
Variable Trigger Delay
Latency (typ) ¹⁵
Jitter (typ)
Output characteristics
Output voltage (nom)
Low level
High level
Impedance (nom)
Duty cycle (nom)
Fan-out
Rear-panel BNC, chassis-referenced (functions as Input or Output)
Channel 1, Channel 2, or both
Channel 1 or Channel 2
Positive or Negative slope
1 MHz
(Output Level setting)/2
10 kΩ, DC-coupled
100 ns
0 to 1000 s, 1-ns resolution
< 140 ns
< 320 ps, rms
0V
0.9 V to 3.8 V into high impedance, 0.1-V resolution
50 Ω
50%
Up to four Keysight 33600A Series waveform generators
External frequency reference input/output
Input characteristics
Connector
Frequency range: Standard
Option OCX
Voltage
Impedance
Lock time (typ)
Output characteristics
Connector
Frequency (nom)
Level (nom)
Impedance (nom)
Rear-panel BNC, shell and pin isolated from chassis and all other connectors (±42 V max.)
10 MHz ± 20 Hz
10 MHz ± 1 Hz
200 mVpp to 5 Vpp
1 kΩ ll 20 pF, AC-coupled
<2s
Rear-panel BNC, chassis-referenced
10 MHz
0 dBm (632 mVpp) into 50 Ω
50 Ω
Footnotes referenced on page 22