33512B Datasheet, PDF (4/23 Pages) Keysight Technologies – Waveform Generators

4 | Keysight | 33500B Series Waveform Generators - Data Sheet
Trueform Technology – Unmatched capabilities for generating a full range of
signals for the most demanding requirements
The 33500B Series waveform generators offer the common
signals and features you expect, such as modulation, sweep, and
burst. But the 33500B Series offers many more features that give
you the capabilities and flexibility you need to get your job done.
Like an intuitive front-panel user interface that makes it easy to
quickly relearn it when you’ve been focused elsewhere. Like built-
in LAN, USB and GPIB interfaces that make it easy to control your
instruments or transfer your waveforms to your instrument.
But the 33500B Series doesn’t stop there. It offers a variety of
capabilities you won’t find elsewhere—capabilities that help you
accelerate your testing and get your project wrapped up faster:
Waveform summing and combining capability
Easily add noise to your signal for margin and distortion testing
using only a single channel. You can create dual-tone
multifrequency signals without a dual-channel generator,
which means you can preserve your budget for other test
needs. On a two-channel model, you can sum and combine
up to four signals.
Variable-bandwidth noise
You can adjust the bandwidth of the built-in noise generator to
control the frequency content of your signal. Apply just the
frequency stimulus you need so you concentrate the energy of
your waveform in frequency bands of interest.
Dual-tone signal created by summing waveforms using the modulation type, “Sum.”
The images show approximately 10 dB increase in amplitude at 50 kHz when the bandwidth is reduced 10x. You can see how the signal energy is increased in the
frequencies of interest when the bandwidth is reduced, instead of being spread over a very wide bandwidth with lower amplitude at all frequencies.