33512B Datasheet, PDF (14/23 Pages) Keysight Technologies – Waveform Generators

14 | Keysight | 33500B Series Waveform Generators - Data Sheet
Specifications
Unless otherwise stated, all specifications apply with a 50 Ω resistive load and auto range ON.
Instrument characteristics
Models & options
33509B/11B/19B/21B
33510B/12B/20B/22B
Option MEM
Option OCX
Option IQP
Waveforms
Standard
Built-in arbitrary ¹
User-defined arbitrary ¹
Operating modes & modulation types
Operating modes
Modulation types
1-channel
2-channel
Increases arbitrary waveform memory to 16 MSa/channel ¹
OCXO timebase for ultra-high stability
IQ player (only available on 33512B and 33522B)
Sine, square, ramp, pulse, triangle, Gaussian noise,
PRBS (pseudorandom binary sequence), DC
Cardiac, exponential fall, exponential rise, Gaussian pulse,
Haversine, Lorentz, D-Lorentz, negative ramp, sinc (Sin X/X)
Up to 1 MSa (16 MSa with Option MEM) with multi-segment sequencing
Continuous, modulate, frequency sweep, burst, output gate
AM, FM, PM, FSK, BPSK, PWM, Sum (carrier + modulation)
Waveform characteristics
Sine
Frequency range
Amplitude flatness (spec) ^{3, 4}
(relative to 1 kHz)
Harmonic distortion (typ) ^{4, 5}
THD (typ)
Non-harmonic spurious (typ) ^{4, 5}
Phase noise (SSB) (typ)
1 kHz offset
10 kHz offset
100 kHz offset
1 µHz to 20 MHz or 30 MHz, 1 µHz resolution
< 100 kHz:
100 kHz to 5 MHz:
5 to 20 MHz:
20 to 30 MHz: ²
± 0.10 dB
± 0.15 dB
± 0.30 dB
± 0.40 dB
< 20 kHz:
20 to 100 kHz:
100 kHz to 1 MHz:
1 to 20 MHz:
20 to 30 MHz: ²
< -70 dBc
< -65 dBc
< -50 dBc
< -40 dBc
< -35 dBc
20 Hz to 20 kHz:
< 0.04%
Standard: < -75 dBc, increasing +20 dB/decade above 2 MHz
Option OCX: < -75 dBc, increasing +20 dB/decade above 10 MHz
(or < -100 dBm, whichever is greater, below 500 MHz)
Standard
-105
-115
-125
Option OCX
-110 dBc/Hz
-125 dBc/Hz
-135 dBc/Hz
1.  Only available on 33511B/12B/21B/22B
2.  Only available on 33519B/20B/21B/22B
3.  Add 1/10th of the output amplitude and offset accuracy specification per °C for operation at temperatures beyond 23°C ± 5°C.
4.  Auto range ON.
5.  DC offset set to zero.