33512B Datasheet, PDF (19/23 Pages) Keysight Technologies – Waveform Generators

19 | Keysight | 33500B Series Waveform Generators - Data Sheet
Specifications
Sync/marker output
Connector
Functions
Assignment
Polarity
Voltage level (nom)
Output impedance (nom)
Minimum pulse width (nom)
External trigger/gate
Connector
Function
Assignment
Polarity
Voltage level (nom)
Impedance (nom)
Minimum pulse width (nom)
Input rate
Minimum pulse width
Duty cycle (nom)
Trigger delay
Input latency (typ)
Input jitter (typ)
Fanout
Modulation input
Connector
Assignment
Voltage level
Input impedance (nom)
Bandwidth (-3 dB, typ)
Frequency reference input
Connector
Reference selection
Frequency range
Lock time (typ)
Voltage level
Input impedance (nom)
Front-panel BNC, isolated from chassis
Sync, sweep marker, burst marker, or arbitrary waveform marker
Channel 1 or channel 2
Normal or inverted
3 Vpp into open circuit, 1.5 Vpp into 50 Ω
50 Ω
16 ns
Rear-panel BNC, chassis-referenced
Input or output
Channel 1, channel 2, or both (as input)
Channel 1 or channel 2 (as output)
Positive or negative slope
0 V to 0.4 V for low, > 2.3 V for high, 3.5 V maximum (as input)
3 Vpp (nom) into open circuit, 1.5 Vpp (nom) into 50 Ω (as output)
10k Ω, DC-coupled (as input)
50 Ω (as output)
16 ns
DC to 1 MHz
100 ns (as input)
50% (as output)
0 s to 1000 s, 4 ns resolution; applies to all trigger events
< 135 ns with trigger delay set to zero
< 2.5 ns, rms
≤ 4 total Keysight 33500B Series waveform generators
Rear-panel BNC, isolated
Channel 1, channel 2, or both
±5 V full-scale
5k Ω
0 Hz to 100 kHz
Rear-panel BNC, isolated from chassis and all other connectors
Internal, external, or auto
Standard: 10 MHz ± 20 Hz
Option OCX: 10 MHz ± 1 Hz
<2 s
200 mVpp to 5 Vpp
1k Ω || 20 pF, AC-coupled