E1987A Datasheet, PDF (15/27 Pages) Keysight Technologies – cdma2000/IS-95/AMPS

15 | Keysight | E1962B cdma2000/IS-95/AMPS Mobile Test Application - Technical Overview
Option E1962B-410 cdma2000 1x advanced
Adds support for 1x Advanced functions including new radio configura-
tions, SO73, SO75, smart blanking, frame early termination, slower reverse
power control, general extension message (GEM) as well as related
measurement enhancements
New radio
configurations
(forward RC11, reverse RC8)
New service options SO75: 9.6 kbps data loopback (RC11, RC8))
SO73: 9.6 kbps EVRC-NW voice
New settings/results for F-FCH blanking duty cycle: Blanking disabled,
smart blanking
1 out of 4 frames, or 1 out of 8 frames
R-FCH blanking duty cycle: Blanking disabled,
1 out of 4 frames, or 1 out of 8 frames
FCH 1/8 rate non-critical frames ratio: 0 to
100%
FCH 1/8 rate non-critical frames direction:
Forward or reverse smart blanking statistic
counters
New settings for early F-FCH ACK mask - RL blanking: 16 bits, each
termination
bit can be ‘0’ or ‘1’ character
F-FCH ACK mask - No RL blanking: 16 bits,
each bit can be ‘0’ or ‘1’ character
R-FCH ACK mask: 16 bits, each bit can be ‘0’ or
‘1’ character
New settings for slower Reverse power control mode: 200 to 400 bps,
reverse power control or 200 bps
Zero rate power control step size: 0.25, 0.5, 1.0,
1.5, or 2.0 dB
Measurements
enhanced for 1x ad-
vanced testing
Frame error rate
Code domain power
Code channel time/phase error
IS-95 active cell call processing functionality
Resident formats
IS-95
Call processing timing
tolerance
Mobile transmissions must be typically within
± 6 μs of test set’s transmitted pilot chan-
nel clock timing for proper reverse channel
acquisition
Cell overhead channels F-Pilot: With user-settable PN offset
F-Sync: With real-time long code and system
time update and updates for user entered pa-
rameters such as SID, NID, PRAT, CDMA_FREQ,
and PN OFFSET
F-Paging: With real-time overhead messages
Protocol stack
TSB-74, J-STD-008, TIA/EIA-95-B, ARIB T53,
and Korean PCS
Base station parameters NID, SID, country code (MCC), network code
(MNC), paging rate, and CDG esc mode
Call control (“one button Register
commands”)
BS call originate
BS call disconnect
MS call originate (auto answer)
MS call disconnect
Access parameters
Nom_Pwr, Nom_Pwr_Ext, Init_Pwr, Pwr_Step,
Num_Step, Max_Req_Seq, Max_Rsp_Seq, and
Pam_Size
Registration support
User-initiated (zone-based), power up, timer
based, implicit registration (mobile originated
call), or direct user entry of mobile IMSI
IS-95 active cell call processing functionality
(continued)
IMSI support
Class 0 only
Supported IMSI class 0 MSIN only (00), MNC + MSIN (01), MCC + MSIN
types
(10), or MCC + MNC + MSIN (11)
Paging channel data rate Selectable full or half rate
TCH/FCH service option SO1 9.6 kbps voice
support
SO2 9.6 kbps data loopback
SO3 9.6 kbps EVRC voice
SO6 Short message service (Rate Set 1)
SO9 14.4 kbps data loopback
SO14 Short message service (Rate Set 2)
SO17 14.4 kbps voice
Loopback service option
traffic data source
SO68 9.6 kbps EVRC-B voice
SO70 9.6 kbps EVRC-WB voice
SO32768 14.4 kbps voice
PRBS (CCITT 2¹⁵ − 1 pattern)
Voice service option
modes
Echo with variable delay, 400 Hz sine wave,
1 kHz sine wave, swept sine wave, multi-tone
audio, real-time vocoder, and null frames
Echo delay
Selectable short, medium, and long
Handoff support
CDMA to AMPS handoff
parameters
Reverse link closed loop
power control modes
Hard handoff (new channel, band), PN offset
handoff, and IS-95 to AMPS
Execute, system type, channel, SAT, and power
level
Active
Alternating – alternating 0 and 1 power bits
All up
Reverse link closed loop
power control transient
All down
User start function that interrupts the current
reverse link closed loop power control mode
and substitutes the user-defined number and
direction of closed loop power control bits;
once the transient is sent, the closed loop
power control reverts to the original state
Reverse link closed loop Up, down, and up-down-up
power control transient
modes
Transient number of
steps
1 to 400