E1987A Datasheet, PDF (11/27 Pages) Keysight Technologies – cdma2000/IS-95/AMPS

11 | Keysight | E1962B cdma2000/IS-95/AMPS Mobile Test Application - Technical Overview
CDMA specifications
cdma2000 active cell call processing functionality
Resident formats
IS-2000 SR1 (cdma2000)
Call processing timing
tolerance
Mobile transmissions typically must be within ±
6 μs of test set’s transmitted pilot
channel clock timing for proper reverse channel
acquisition
Protocol stack
IS-2000 revision 0 with addendum (PREV=6)
Cell overhead channels
for PREV=6
F-Pilot: With user-settable PN offset
F-Sync: With real-time long code and system
time update and updates for user entered
parameters
F-Paging: With real-time overhead messages
F-QPCH: Indicates if active page will be in the
next paging channel slot
Cell parameters
NID, SID, country code (MCC), network code
(MNC), CDG esc mode, max slot cycle index,
and reverse link traffic pilot gain
Control channel
Paging rate, F-QPCH rate, F-QPCH state,
parameters (PREV=6) F-QPCH relative level
Paging channel data rate Selectable from either full or half rate
(PREV=6)
F-QPCH data rate
Selectable from either full or half rate
Access parameters
(PREV=6)
Nom_Pwr, Nom_Pwr_Ext, Init_Pwr, Pwr_Step,
Num_Step, Max_Req_Seq, Max_Rsp_Seq, and
Pam_Size
Call control (“one button Register
commands”)
BS call originate
BS call disconnect
MS call originate (auto answer)
MS call disconnect
Registration support
User-initiated (zone-based), power up (with on/
off support), timer based (with on/off support),
implicit registration (mobile originated call), or
direct user entry of mobile IMSI
Registration reported
mobile information
ESN (hex), ESN (decimal), MCC, MNC, MSIN,
slot class, slot cycle index, protocol revi-
sion, band class, operating mode, MAX EIRP,
registration type, QPCH support, enhanced RC
support, minimum power control step size, MS
called party number, MEID supported, MEID
(hex), and MEID (decimal)
Status request query
control
Selectable between on and off; default of “on”
causes test set to perform the status queries
during registration or mobile origination when a
new ESN is received by the test set
Max EIRP
User must enter the mobile’s maximum power
in dBW when the status request query field is
set to off
IMSI support
Class 0 only
Supported IMSI class 0 MSIN only (00), MNC + MSIN (01), MCC + MSIN
types
(10), or MCC + MNC + MSIN (11)
cdma2000 active cell call processing functionality (continued)
Query mobile
capabilities function
Uses signaling to request the mobile’s
capabilities; requested parameters include:
FCH: FCH supported, FCH 5 ms frames
supported, F-FCH radio configurations, R-FCH
radio configurations
DCCH: DCCH supported, DCCH frame size,
F-DCCH radio
configurations, R-DCCH radio configurations
F-SCH: F-SCH supported, number of F-SCH
channels supported, turbo encoder supported,
turbo encoded rate set 1 max data rate, turbo
encoded rate set 2 max data rate, convolutional
encoder supported, convolutional encoded rate
set 1 max data rate, convolutional encoded rate
set 2 max data rate
R-SCH: R-SCH supported, number of R-SCH
channels supported, turbo encoder supported,
turbo encoded rate set 1 max data rate, turbo
encoded rate set 2 max data rate, convolutional
encoded rate set 1 max data rate, convolutional
encoded rate set 2 max data rate
Supported TCH/FCH
radio configuration
combinations
Forward RC1, reverse RC1 (F-RC1, R-RC1)
Forward RC2, reverse RC2 (F-RC2, R-RC2)
Forward RC3, reverse RC3 (F-RC3, R-RC3)
Forward RC4, reverse RC4 3 (F-RC4, R-RC3)
Forward RC5, reverse RC4 (F-RC5, R-RC4)
Forward RC11, reverse RC8 (F-RC11, R-RC8)
TCH/FCH service option SO1 9.6 kbps voice
support
SO2 9.6 kbps data loopback
SO3 9.6 kbps EVRC voice
SO6 Short message service (Rate Set 1)
SO9 14.4 kbps data loopback
SO14 Short message service (Rate Set 2)
SO17 14.4 kbps voice
SO55 9.6 or 14.4 kbps data loopback
SO68 9.6 kbps EVRC-B voice
SO70 9.6 kbps EVRC-WB voice (fully supported
with special ADC hardware E5515C-H05 or
E5515CU- H05 and the latest software)
SO73 9.6 kbps EVRC-NW voice (RC11, RC8)
SO75 9.6 kbps data loopback (RC11, RC8)
SO32768 14.4 kbps voice
Loopback service option PRBS (CCITT 215−1 pattern)
traffic data source
Voice service option
modes
Echo with variable delay, 400 Hz sine wave,
1 kHz sine wave, swept sine wave, multi-tone
audio, real-time vocoder, and null frames
Echo delay
Selectable as short, medium, and long
F-SCH service option
support
SO32 (+F-SCH) or SO32 (+SCH): TDSO
supporting all SR1 rates up to 153.6 kbps in
(F-RC3, R-RC3), (F-RC4, R-RC3), or (F-RC11,
R-RC8)
IS-2000 to IS-95 handoff parameters: Execute,
channel, band, protocol, and service option
IS-2000 to AMPS handoff parameters: Execute,
channel, SAT, and power level