FY0H104ZF_16 Datasheet, PDF (6/13 Pages) Kemet Corporation – Supercapacitors FY Series

Supercapacitors – FY Series
Specifications cont’d
Item
FY Type (FYD, FYH, FYL)
Temperature Cycle
High Temperature and
High Humidity Resistance
Capacitance
ESR
Current (30 minutes value)
Appearance
Capacitance
ESR
Current (30 minutes value)
Appearance
Capacitance
Satisfy initial ratings
No obvious abnormality
Within ±20% of initial value
≤ 120% of initial ratings
≤ 120% of initial ratings
No obvious abnormality
Within ±30% of initial value
High Temperature Load
ESR
< 200% of initial ratings
Current (30 minutes value) < 200% of initial ratings
Appearance
No obvious abnormality
Self Discharge Characteristics
(Voltage Holding Characteristics)
Voltage between terminal leads > 4.2 V
Marking
Date
code
Serial
number
A1
001 FYD 5.5 V
0.047 F
A1
FYD 5.5 V
0.047 F
Maximum
operating voltage
Nominal
capacitance
Negative polarity
identification mark
Test Conditions
(conforming to JIS C 5160-1)
Conforms to 4.12
Temperature
Condition:
Number of cycles:
−25°C » Room
temperature » +70°C »
Room temperature
5 cycles
Conforms to 4.14
Temperature:
Relative humidity:
Testing time:
+40±2°C
90 to 95% RH
240±8 hours
Conforms to 4.15
Temperature:
Voltage applied:
Series protection
resistance:
Testing time:
+70±2°C
Maximum operating
voltage
0Ω
1,000 +48 (+48/−0)
hours
Charging condition
Voltage applied:
Series resistance:
Charging time:
5.0 VDC (Terminal at
the case side must be
negative)
0Ω
24 hours
Storage
Let stand for 24 hours in condition described
below with terminals opened.
Ambient
temperature: < 25ºC
Relative humidity: < 70% RH
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
S6015_FY • 10/6/2016 6