CA064X104K4GACTU Datasheet, PDF (16/18 Pages) Kemet Corporation – Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Capacitor Array, C0G Dielectric, 10 – 200 VDC, (Commercial & Automotive Grade)
Figure 6 – Reel Dimensions
Full Radius,
See Note
Access Hole at
Slot Location
(Ø 40 mm minimum)
W3 (Includes
flange distortion
at outer edge)
W2 (Measured at hub)
A
D (See Note)
C
B (see Note)
(Arbor hole
diameter)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
W1 (Measured at hub)
Table 8 – Reel Dimensions
Metric will govern
Tape Size
8 mm
12 mm
16 mm
Tape Size
8 mm
12 mm
16 mm
Constant Dimensions — Millimeters (Inches)
A
B Minimum
C
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
Variable Dimensions — Millimeters (Inches)
N Minimum
50
(1.969)
W₁
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
W₂ Maximum
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
D Minimum
20.2
(0.795)
W₃
Shall accommodate tape
width without interference
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1016_C0G_ARRAY_SMD • 10/14/2016 16