MDM Datasheet, PDF (9/11 Pages) ITT Industries – Micro-D Metal Shell - .050 Contact Spacing

Micro-D Metal Shell - .050" Contact Spacing
MDM
Connector Saver
Save wear and tear on your equipment and
systems connectors by using the "Connector
Saver".
The multi-matings and unmatings experienced
by most connectors during testing and final
check out can be eliminated.
Simply mate the "Connectors Saver" to your
unit and use the opposite side for your testing
interface...less wear, less tear, less chance of
damage. It is available in all eight standard
MDM layouts. Mating hardware is available
and can be ordered either separately or
included with the connector saver.
.040 (1.02) MAX. ALLOWABLE
AXIAL FLOAT
#2-56 UNC-2A THD (9-51)
(TYP.)
.790 (20.07) MAX.
.315
(8.00)
MAX.
JACKSCREW/JACKPOST BUSHING
(FOR REFERENCE ONLY SEE
ORDERING INFORMATION BELOW.)
B
A
MICROPIN
MICROSOCKET
CONNECTOR RECEPT
Size
9
15
21
25
31
37
51
100
C
Electroless Nickel (A174) Plated
With Hardware W/O Hardware
MDM98479-86 MDM98479-18
MDM98479-87 MDM98479-19
MDM98479-88 MDM98479-20
MDM98479-89 MDM98479-21
MDM98479-90 MDM98479-14
MDM98479-91 MDM98479-15
MDM98479-92 MDM98479-16
MDM98479-93 MDM98479-17
CONNECTOR, PLUG
BACKPOTTING, EPOXY
INTERFACIAL SEAL
.090 (2.29) REF.
(TYP.)
.900 (22.86) REF.
MDM Size 9 Shown
.185 (4.70) MAX. (TYP.)
E-RING (TYP.)
Cadmium over Nickel (A101) Plated
With Hardware W/O Hardware *Hardware Kits
MDM98479-78 MDM-97294-371 320-9505-014**
MDM98479-79 MDM-97294-372 320-9505-014**
MDM98479-80 MDM-97294-373 320-9505-014**
MDM98479-81 MDM-97294-374 320-9505-014**
MDM98479-82 MDM-97294-375 320-9505-014**
MDM98479-83 MDM-97294-376 320-9505-014**
MDM98479-84 MDM-97294-377 320-9505-014**
MDM98479-85 MDM-97294-717 320-9508-014***
A
Max.
B
± .005 (0.13)
C
Max.
.785 (19.94)
.565 (14.35)
.308 (7.82)
.935 (23.75)
.715 (18.16)
.308 (7.82)
1.085 (27.56)
.865 (21.97)
.308 (7.82)
1.185 (30.10)
.965 (24.51)
.308 (7.82)
1.335 (33.91)
1.115 (28.32)
.308 (7.82)
1.485 (37.72)
1.265 (32.13)
.308 (7.82)
1.435 (36.45)
1.215 (30.86)
.351 (8.91)
2.170 (55.12)
1.800 (45.72)
.394 (10.01)
* Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings.
** Size 9-51-#2-56 UNC-2B Thread
*** Size 100-#4-40 UNC-2B Thread
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
15